DiyLightAnimation
Hardware => Lynx Express => Topic started by: arw01 on November 05, 2013,
-
Was not totally sure which was in the ic socket was pin 1..
-
Turn 'em around they're in backwards....
Good Luck
-
they are upside down.
the dot represents pin1.
the concave arc on the board has pin1 at that location (to the left of the arc)
-
And they are not real forgiving about orientation when you have one flipped and apply power (of course I KNEW that i put one in wrong that time, I was just testing a theory... ;)..)
Looks like you're almost there..congrats!