DiyLightAnimation

Hardware => Lynx Smart String => Topic started by: zwiller on November 20, 2012,

Title: Programming SSC for channels beyond 4096
Post by: zwiller on November 20, 2012,

Just wanted a confirmation that say if I want if I need a SSC for channel 4097 I select channel 1 from the utility and switch hub to universe 2.  Thanks in advance. 

Title: Re: Programming SSC for channels beyond 4096
Post by: peteandvanessa on November 20, 2012,

You are not allowed to view links. Register or Login

Just wanted a confirmation that say if I want if I need a SSC for channel 4097 I select channel 1 from the utility and switch hub to universe 2.  Thanks in advance.

That's correct, that's what I did, program it for channel 1 and move the jumper to universe 2 and you are good to go.

Title: Re: Programming SSC for channels beyond 4096
Post by: zwiller on November 22, 2012,

Thanks Pete! 

Title: Re: Programming SSC for channels beyond 4096
Post by: jnealand on November 22, 2012,

This has worked good for testing with Nutcracker which currently only supports chan 1 as the start channel.  I will have my pixel tree on the second hub, but I can play with the effects as generated for my test by just keeping the hub at univ 1.

Title: Re: Programming SSC for channels beyond 4096
Post by: zwiller on November 26, 2012,

Spent alot of time with this.  Works great with LSP.  I made a test sequence and keep changing channel count and addresses to make sure I was on.  The key was making the first and last pixel white to check for the right start/stop/direction. 

I think it would REAL NICE change if the utility would not allow addresses above 4096 (or even better if it did work beyond 4096)  ;D  I screwed up a few more times than I am proud of.   <fp.  Strange but it works but was off 2 rgb (6) channels.  Maybe from being on the 2nd universe?