DiyLightAnimation

Hardware => Lynx Wireless DMX => Topic started by: mmais68569 on June 14, 2011,

Title: TX/RX Antenna
Post by: mmais68569 on June 14, 2011,

Using the TX/RX units how directional is the antenna? In other words how much off a straight line will these work or is the transmitting & receiving 360degree. Just trying to figure out where I need to locate the transmitter so 3 RX receivers will work OK .

             Thanks Mike

Title: Re: TX/RX Antenna
Post by: rm357 on June 14, 2011,

Somewhere on the forum is a picture... it is a double doughnut shape radiating from the antenna. Best coverage is obtained by having the TX at least 6 foot off the ground and keeping the receivers low so that they are in the lower doughnut. The tx should be oriented with the wires coming out of the bottom of the box.

RM

Title: Re: TX/RX Antenna
Post by: RJ on June 14, 2011,

It is 360 around but it is stronger to the front and rear than the sides.

RJ

Title: Re: TX/RX Antenna
Post by: rm357 on June 15, 2011,

From the tech data...

With the board oriented as shown in the first picture, the radiation pattern is indicated in the second picture. The more red, the stronger the signal in that direction.

Title: Re: TX/RX Antenna
Post by: barbotte on June 15, 2011,

what is the distance they can received ??? few feet of few 100 feet?
thanks

Title: Re: TX/RX Antenna
Post by: Rainlover on June 15, 2011,

I had an express with an EX/RX that was over 100 ft from the TX. It worked fine. I think that line of sight is well over 500 ft but I don't know that for sure.

Title: Re: TX/RX Antenna
Post by: rm357 on June 15, 2011,

The range depends... it operates in the 2.4Ghz range, which is used for all kinds of things, the most popular being wifi...

Each of the three selectable universes is on a different freq, so if you get poor performance on one, you can try using a different one.

Title: Re: TX/RX Antenna
Post by: chrisatpsu on June 15, 2011,

and some cordless phones

Title: Re: TX/RX Antenna
Post by: DaMenaCe on August 17, 2011,

You are not allowed to view links. Register or Login

The range depends... it operates in the 2.4Ghz range, which is used for all kinds of things, the most popular being wifi...

Each of the three selectable universes is on a different freq, so if you get poor performance on one, you can try using a different one.

HOW to we change it IF one freq is not working too well... ?/

Title: Re: TX/RX Antenna
Post by: KeithTarpley on August 17, 2011,

Greetings,,,

You can change the UNIverse jumper to change between the 3 different frequencies.  Look at the pics in the wiki manual.

http://diylightanimation.com/wiki/index.php?title=Manual_TX_RX2

Keith