I've circled what looks like a solder bridge in the attached picture, maybe something to look at,
Bill
Extra solder from when I re-hit all the joints to ensure I soldered right. I left my soldering iron on so the tip got dirty. I should have cleaned it before checking all the joints. I paid the price by having extra solder on some of the joints. I cleaned up the excess.....
I really do think I either have a bad capacitor or the mosfit transistor is bad. One of the capacitors reads 5+ and 5- on both sides, the other one does not show the 5-. It is the one that comes out of the mosfit transistor.
If someone wants to read the voltage on both sides of their capacitors and let me know if the read 5v across it and if they read voltage from their mosfit. The outside framework is 5+, one of the outer lugs is also 5+, the other outer is 5-. the center lug should be the gate, it should read 5+, I am not getting that. But I could be wrong on my understanding of how a mosfit works.
My guess is I burned something out when I re-hit the joints with a dirty soldering iron. I think I had an original problem of a cold solder joint that I made worse with too much heat.
By the way, I replaced all three chips which is why I am now going down this road.
Thanks everyone!