DiyLightAnimation

Hardware => Lynx Wireless DMX => Topic started by: shaunkad on March 29, 2011,

Title: EX/RX non LE header
Post by: shaunkad on March 29, 2011,

Can this be purchased from mouser or is this a  PCB? There is no mention of it in the wiki and  I could not find it any where except the coops threads.

Title: Re: EX/RX non LE header
Post by: rrowan on March 29, 2011,

Here is the wiki page

http://diylightanimation.com/wiki/index.php?title=Mod_Wireless

Cheers

Rick R.

Title: Re: EX/RX non LE header
Post by: shaunkad on March 29, 2011,

You are not allowed to view links. Register or Login

Here is the wiki page

http://diylightanimation.com/wiki/index.php?title=Mod_Wireless

Cheers

Rick R.

Thank you, Rick

I did not think to look at the V1 page of the EX/RX page

Shaun

Title: Re: EX/RX non LE header
Post by: jnealand on March 29, 2011,

I would suggest adding a note to that wiki page.

RJ suggests that you get better reception if the antenna is pointing up.  When I did my SSRs I put them in the top with the antenna up, but when you close the case the antenna is pointing down.  I turned them around last season, but with one of them the wires were to short to do this and I had to desolder and put new, longer wires in place.  Not a big deal, but anyone starting from scratch could avoid this.