DiyLightAnimation
Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Home
Wiki
Blog
Chat
Help
Login
Register
DiyLightAnimation
»
Hardware
»
Lynx MR16 / 16 CH DC Controller
»
RGB WIRING TO MR16
« previous
next »
Print
Pages: [
1
]
Author
Topic: RGB WIRING TO MR16 (Read 1496 times)
TexasStingray
Coop Manager
Sr. Member
Posts: 791
RGB WIRING TO MR16
«
on:
April 21, 2012, »
What is the best/safest way to wire up a RGB String to the MR16. The reason I as is that the MR16 has a positive for each channel and the RGG only has on 1.
Thanks
Scott
Logged
Scott Wanner
TX
Watch my videos
You are not allowed to view links.
Register
or
Login
JonB256
Sr. Member
Posts: 672
Re: RGB WIRING TO MR16
«
Reply #1 on:
April 21, 2012, »
Any positive is electrically the same. So, literally, take your pick.
If you check with a multimeter in Resistance mode, you will find that they "are one"
Logged
mmais68569
Sr. Member
Posts: 374
Re: RGB WIRING TO MR16
«
Reply #2 on:
April 21, 2012, »
What you want to do is, the first Pos.(+) you connect the black lead(this is normally the color but could be some other color)
Then take the red wire connect it to CH1 Neg(-)
Then take the green wire & connect it to CH2 Neg
Then take the Blue wire & connect it to CH3
That is one complete setup.
Now if you want to add more do the same thing just use the next set of 3 CH.
Mike
Logged
tbone321
Sr. Member
Posts: 4055
Re: RGB WIRING TO MR16
«
Reply #3 on:
April 22, 2012, »
To make it simple, the MR16 is negative switched so you can connect your positive to any of the positive leads since they are all always on. Then connect your negative leads to the negative of the channels on the MR16 that want to use to control the string.
Logged
If at first you don't succeed,
your not cut out for sky diving
Print
Pages: [
1
]
« previous
next »
DiyLightAnimation
»
Hardware
»
Lynx MR16 / 16 CH DC Controller
»
RGB WIRING TO MR16