Ok, i made a change that sets the unit number to be
multiples of 16.
i have a 16x100 tree.
First string , pixel 1 the unit is 1 and the circuit is 1
second string, pixel 1 the unit is 19, circuit is 1
Almost all of those cross mapping error messages are gone.
I suspect that you'll have to adopt LOR's channel system in order for the files to play correctly (in xLights or LOR). For example, with a 128 string node (assuming a starting channel of 1), the first string would have a Unit (Hex) ID of "1" and Circuit # 1. The remaining 383 channels for that string could follow sequentially on Unit 1 through circuit 384. For string two, the Unit (Hex) ID would be 19 (i.e., the 25th, 16-channel), with a Circuit ID of 1.
Now i am getting a bunch of these
WARNING: channel 'S2-P99-G' is unmapped
WARNING: channel 'S2-P99-B' is unmapped
WARNING: channel 'S2-P100-R' is unmapped
WARNING: channel 'S2-P100-G' is unmapped
WARNING: channel 'S2-P100-B' is unmapped
WARNING: channel 'S3-P1-R' is unmapped
WARNING: channel 'S3-P1-G' is unmapped
WARNING: channel 'S3-P1-B' is unmapped
WARNING: channel 'S3-P2-R' is unmapped
WARNING: channel 'S3-P2-G' is unmapped
WARNING: channel 'S3-P2-B' is unmapped
WARNING: channel 'S3-P3-R' is unmapped
WARNING: channel 'S3-P3-G' is unmapped
WARNING: channel 'S3-P3-B' is unmapped
WARNING: channel 'S3-P4-R' is unmapped
WARNING: channel 'S3-P4-G' is unmapped
WARNING: channel 'S3-P4-B' is unmapped
WARNING: channel 'S3-P5-R' is unmapped
WARNING: channel 'S3-P5-G' is unmapped
WARNING: channel 'S3-P5-B' is unmapped
WARNING: channel 'S3-P6-R' is unmapped
WARNING: channel 'S3-P6-G' is unmapped
WARNING: channel 'S3-P6-B' is unmapped
WARNING: channel 'S3-P7-R' is unmapped
WARNING: channel 'S3-P7-G' is unmapped
WARNING: channel 'S3-P7-B' is unmapped
WARNING: channel 'S3-P8-R' is unmapped
WARNING: channel 'S3-P8-G' is unmapped
WARNING: channel 'S3-P8-B' is unmapped
WARNING: channel 'S3-P9-R' is unmapped
WARNING: channel 'S3-P9-G' is unmapped
WARNING: channel 'S3-P9-B' is unmapped
WARNING: channel 'S3-P10-R' is unmapped
WARNING: channel 'S3-P10-G' is unmapped
Strange, LOR gives no errors when it loads this file and the preview looks correct.
meighan.net/htdocs/nutcracker/effects/workspaces/2/AA+FLY_0_0.lms
I think you are getting close! What lighting networks do you have do you have defined in xLights? This error means that the channels you are importing don't match up to the networks you have defined in xLights.
Matt
I changed to pixlenet and most of the unmatched went away.
Here is the new list
Reading LOR sequence
Track 1 length = 5000 centiseconds
WARNING: S3-P97-R and S4-P1-R map to the same channel
WARNING: S3-P97-G and S4-P1-G map to the same channel
WARNING: S3-P97-B and S4-P1-B map to the same channel
WARNING: S3-P98-R and S4-P2-R map to the same channel
WARNING: S3-P98-G and S4-P2-G map to the same channel
WARNING: S3-P98-B and S4-P2-B map to the same channel
WARNING: S3-P99-R and S4-P3-R map to the same channel
WARNING: S3-P99-G and S4-P3-G map to the same channel
WARNING: S3-P99-B and S4-P3-B map to the same channel
WARNING: S3-P100-R and S4-P4-R map to the same channel
WARNING: S3-P100-G and S4-P4-G map to the same channel
WARNING: S3-P100-B and S4-P4-B map to the same channel
WARNING: S7-P97-R and S8-P1-R map to the same channel
WARNING: S7-P97-G and S8-P1-G map to the same channel
WARNING: S7-P97-B and S8-P1-B map to the same channel
WARNING: S7-P98-R and S8-P2-R map to the same channel
WARNING: S7-P98-G and S8-P2-G map to the same channel
WARNING: S7-P98-B and S8-P2-B map to the same channel
WARNING: S7-P99-R and S8-P3-R map to the same channel
WARNING: S7-P99-G and S8-P3-G map to the same channel
WARNING: S7-P99-B and S8-P3-B map to the same channel
WARNING: S7-P100-R and S8-P4-R map to the same channel
WARNING: S7-P100-G and S8-P4-G map to the same channel
WARNING: S7-P100-B and S8-P4-B map to the same channel
WARNING: S11-P97-R and S12-P1-R map to the same channel
WARNING: S11-P97-G and S12-P1-G map to the same channel
WARNING: S11-P97-B and S12-P1-B map to the same channel
WARNING: S11-P98-R and S12-P2-R map to the same channel
WARNING: S11-P98-G and S12-P2-G map to the same channel
WARNING: S11-P98-B and S12-P2-B map to the same channel
WARNING: S11-P99-R and S12-P3-R map to the same channel
WARNING: S11-P99-G and S12-P3-G map to the same channel
WARNING: S11-P99-B and S12-P3-B map to the same channel
WARNING: S11-P100-R and S12-P4-R map to the same channel
WARNING: S11-P100-G and S12-P4-G map to the same channel
WARNING: S11-P100-B and S12-P4-B map to the same channel
WARNING: S15-P97-R and S16-P1-R map to the same channel
WARNING: S15-P97-G and S16-P1-G map to the same channel
WARNING: S15-P97-B and S16-P1-B map to the same channel
WARNING: S15-P98-R and S16-P2-R map to the same channel
WARNING: S15-P98-G and S16-P2-G map to the same channel
WARNING: S15-P98-B and S16-P2-B map to the same channel
WARNING: S15-P99-R and S16-P3-R map to the same channel
WARNING: S15-P99-G and S16-P3-G map to the same channel
WARNING: S15-P99-B and S16-P3-B map to the same channel
WARNING: S15-P100-R and S16-P4-R map to the same channel
WARNING: S15-P100-G and S16-P4-G map to the same channel
WARNING: S15-P100-B and S16-P4-B map to the same channel
# of mapped channels with effects=4797
# of effects=154681
Media file=
New # of time periods=1000
New data len=4800000
Writing xLights sequence
Finished writing new file: C:\Users\sean\Documents\Light-O-Rama\Sequences\AA+FLY_0_0.xseq
Finished converting all files
I notice any channel > 96 is coming up unmapped.
I have 16 strings of 100 pixels each.