DiyLightAnimation
Store => Finished COOPS => Topic started by: NavyGator on March 13, 2013,
-
Hello DLA Members,
This COOP is for the Lynx Aeon Clock
*********************************************************************************
Please read this post completely before participating in this COOP.
PIC’s will be programed for this COOP and the following kits will be offered.
Kit #1 - Aeon PCB with parts. This kit includes the PCB and all parts needed to build the clock.
There will be no PCB or parts only options in this COOP.
Information on the Lynx Aeon can be found here:
http://diylightanimation.com/index.php?topic=3267.0
*********************************************************************************
The COOP will be limited to 100 kits.
This COOP will close on March 23, 2012 at 8:00 PM Eastern Standard Time or when it fills its limit of 100 kits.
Full Payment is expected when the COOP is closed. All members will receive PMs or be directed by post with details on how to pay once the COOP closes.
Please get your PayPal payments in as soon as you get the COOP invoice PM. No orders will be placed until all payments have been received.
By joining this COOP, you also agree that the COOP manager, DLA (as a board to also include all administrators, moderators, and members) shall not be held for any liability. You are joining this COOP at your own risk.
As with any COOP, this COOP is subject to the forum rules. These rules can be reviewed using the following link.
Forum COOP rules:
http://diylightanimation.com/index.php?topic=111.0
*********************************************************************************
We have a base goal for kit #1 of 25 kits. This goal allows the cost per unit to drop low enough to make it cost effective to run the COOP. Below this number we will not make the order.
Here is the pricing breakdown based on the initial quote(s) from the vendor. Pricing is in US Dollars and includes the kit cost plus the 3% COOP fee. Shipping and the 3% PayPal fee must be added to these estimated prices.
Kit #1 – Lynx Aeon Clock PCB with Parts (with PCB)
$57.50 per kit at 25 kits
This is an estimate. As always, higher numbers reduce pricing and lower numbers increase pricing.
Shipping will be by US Postal Service Priority Mail Flat Rate boxes. For kit #1, 1-3 kits should fit in a medium box. Larger orders will require a larger box or multiple boxes.
Small Flat Rate Box: $5.80 (US), $19.95 (Canada), $23.95 (International)
Medium Flat Rate Box: $12.35 (US), $40.95 (Canada), $59.95 (International)
Large Flat Rate Box: $16.85 (US), $53.95 (Canada), $77.95 (International)
If you wish to have insurance on your package, it is your responsibility to choose the amount and look up the cost to add. You must add this to your PayPal payment and in the comments explain you paid for insurance and how much. We cannot be held responsible for your package once accepted at the post office and we have a receipt of shipment if it is not insured.
*********************************************************************************
Post the quantity of each kit you wish and your country for shipping calculations (US, Canada or International) in this thread. If you later wish to change your quantity, please post again clearly stating that this is an update to a previous order and state the new quantity.
Please do not post questions or your thoughts in the COOP thread. Start a new thread in the correct area for these. COOP threads are strictly for people requesting orders.
Thanks for participating in this COOP.
Rich
*********************************************************************************
Sample Post
2 – Kit #1
US
-
Member | Kit #1 | Destination | Paid | Shipped |
arw01 | 1 | US | X | |
basis21b | 1 | US | X | |
CaptainMurdoch | 1 | US | X | |
caretaker | 1 | US | X | |
denverstone | 1 | US | X | |
foodseller | 1 | US | X | |
geronc | 3 | US | X | |
Kasey911 | 1 | US | X | |
lorajoslyn | 1 | US | X | |
mmciver | 1 | US | X | |
monkey141 | 1 | US | X | |
mtdew4me | 1 | US | X | |
Nashville Roy | 1 | US | X | |
NavyGator | 2 | US | X | |
oj70chevy | 1 | US | X | |
Ozmin | 3 | US | X | |
Pete | 2 | US | X | |
tstewart | 1 | US | X | |
Voltorb | 3 | US | X | |
TOTAL | 27 | | | |
-
Place holder
-
Woot!
1 - kit # 1, shipped to US please!
Thanks for running the coop!
**edit**
Was so excited, I didn't follow the rules. Fixed :)
-
1 – Kit #1
US
Thank you!
-
3 Kits for me please.
US
Thanks - Bill
-
1 kit for me please, shipped in the US of A.
Tell Mrs Gator thank you for letting you do the coop!
-
3 kits shipped to the US please.
Thank you!
-
I will take:
Kit#1 - 1 - Shipped to the US
Please.
Thank you!
Mike
-
1 in the US, please.
Thanks for doing this!
-
1 – Kit #1
US
-
I would like 1 kit 1 please
-
1--#1 Kit Please
USA
Thanks,
Foody
-
1 – Kit #1
US
Thank you!
-
Ill take 1 kit.
US
-
1 Kit shipped to the US. Thanks for running the CoOp.
-
2 kits please - sip to USA
Thanks,
Pete
-
1 – Kit #1
US
Thanks!
-
Ill take 1 kit, ships to US
-
I will take 3 to US. Thanks.
-
I got ahead of myself last night.
The COOP is still open for orders.
Rich
-
I'll take 1 kit, ships to the US.
-
Okay everyone, the COOP is closed for orders. Please ensure that your order quantity and country is correct as the COOP is now closed. If you have changed your mind and need to cancel your order please let me know as soon as possible as this affects the prices for everyone.
Whats next? The next step in the COOP process is to get final quotes for the numbers of kits we are ordering. Once I get the quotes and do some math I will generate the cost that you owe for the COOP and send you a PM with further directions.
If you have any questions let me know so I can get you an answer. If this is your first COOP....... <pop..
Thanks,
Rich
-
Hello Aeon COOP members.
I just sent out the COOP payment PM to everyone. If you did not get a PM or if you have any questions let me know.
Once I get all the payments I will make the order.
Thanks for participating in the COOP.
Rich
-
Payment sent, thanks for doing the coop Rich!
-
Money sent!
Thank you Richard!!!
-
If the one lone last person doesn't pay, I'd happily take their place. I was off on vacation so missed the co-op completely. That will teach me not to put it in Tapatalk!
-
Money sent - Sorry . . .A family emergency has taken a lot of my time.
Pete
-
COOP/DLA Members,
I had one member that had to back out of the COOP. With that being said I have received all other payments at this time.
Due to the member that had to back out, I have 1 kit available for purchase. In order to make everything fair, the first person to post a response to this post will be eligible to purchase it. I will only keep the kit available for 24 hours and will coordinate with the member via PM after posting in the forum.
If you have any questions let me know.
Again, thanks to everyone for participating in the COOP.
Rich
-
I will take it. I will go dig in the posting here to see where and how much to send funds for.
Thank you
Alan
-
I will take it. I will go dig in the posting here to see where and how much to send funds for.
Thank you
Alan
Alan,
The payment PM has been sent.
Thanks,
Rich
-
COOP Members,
All payments have been received. I will be ordering the parts today and coordinating with RJ to get the PCB's ordered.
If you have any questions please let me know.
Thanks for participating in the COOP.
Rich
-
Hi COOP members,
I just wanted to give everyone an update as to where we are at in the COOP process. I have all of the parts ordered and they should be here this week. RJ is working on getting the PCB's for us. Once the parts get here I will work on getting them sorted.
Let me know if you have any questions.
Rich
-
Hi everyone,
I just wanted to give a status update. I got the first parts in today and I will probably get my table and workbench set up today to begin to sort parts.
I will try an post an update every couple of days with any updates.
Let me know if you have any questions.
Rich
-
Time for another update.
The order from Mouser came in so I now have all of the components and I have started the sorting process.
I should have all of the components sorted by the end of the weekend. Once I get the PCB's in I will get the packages ready and get them shipped off.
Let me know if you have any questions.
Rich
-
All right everybody.
Here is the status as of today.
-PIC's have been programmed
-All of the components have been sorted, bagged and boxed up (picture)
-RJ is waiting for delivery of the PCB's and should have those delivered to me in about a week or two
Once the PCB's get here they will get wrapped up and put in the boxes with the rest of the parts. Then they will get mailed out a couple of days later.
One last bit of info for everyone, from my avatar you can probably guess who my employer is and the last couple of months have been interesting to say the least. The short and sweet story is that Mrs. NavyGator will be finishing the COOP just like last year.
If you have any questions let me know. Thanks for participating in the COOP and I hope you are all anxious to get your clocks.
Rich
-
God Bless you and the Wife! She came through is spades last year.
RJ
-
One last bit of info for everyone, from my avatar you can probably guess who my employer is and the last couple of months have been interesting to say the least. The short and sweet story is that Mrs. NavyGator will be finishing the COOP just like last year.
Rich
Rich,
Thanks for your service! Get home safe!
Mike
-
God Bless you and the Wife! She came through is spades last year.
RJ
Thanks RJ. I will pass it on to the wife.
Rich
-
One last bit of info for everyone, from my avatar you can probably guess who my employer is and the last couple of months have been interesting to say the least. The short and sweet story is that Mrs. NavyGator will be finishing the COOP just like last year.
Rich
Rich,
Thanks for your service! Get home safe!
Mike
Mike,
Proud to serve, thanks!!!!
Rich
-
Thanks for serving this GREAT country! and thank you to Mrs NavyGator for your support and help.
-
Hi COOP Members.
I got great news. The PCB's arrived yesterday, were sorted and the boxes were closed up. Mrs. NavyGator should have all the packages mailed out by Friday. I will let everyone know once all the boxes are shipped.
If you have any questions let me know.
Rich
-
Thanks Rick and make sure to thank your wife for us <res.
RJ
-
Hi everyone.
Mrs. NavyGator finished mailing out all of the packages today so you should be getting your clocks by the end of the week.
Happy soldering.
Rich
-
Were not Worthy!! <res.
Thanks Mrs. NavyGator.
BTW My middle son just graduated from University of Florida this weekend, so I have to say it.... "GO GATORS!!!"
one proud gator parent!
-
Rich thank you for doing this coop and your service to our country and especially thank your wife for going above and beyond.
UPDATE! Received kit today! <res. Looking forward to putting this together.
AND, RJ thanks for creating the Aeon
-
Thanks guys, I will pass the praise on to the wife.
Rich
-
Received my clock today. Thank you again to you and your wife for running this coop.
Mike
Sent from my HTC One X using Tapatalk 2
-
My package arrived today as well. Thank you NavyGator and Mrs. NavyGator!
Now to find a chisel tip for the Weller and start to work this weekend.
Alan
-
Got my clock on the 8th as well put it together and mounted on Friday and it works great! well maybe to great. A few friends are already asking to build them one. thanks for running this coop..
-
Your welcome guys. Enjoy your clocks.
Rich