DiyLightAnimation
Store => Sale/Trade => Topic started by: chrisatpsu on May 21, 2011,
-
anyone have a spare or two that they dont need anymore?
-
If you mean the 1500 I have a couple extras I can part with.
-
i have the 1500's, i'm looking for the cg-500 for the mr16
-
nvm, by building my own custom standoffs, i can mount both mr 16 boards inside the cg-1500
-
nvm, by building my own custom standoffs, i can mount both mr 16 boards inside the cg-1500
I would like to see a picture of that. I have 2 MR16 and an extra 1500 case.
Please and thank you ;D
Ron
-
make a support out of thin strip of metal, then drill holes, and places standoffs where the mr16 mounting holes are. viola! there you go
in a 2 by 2 pattern, the cg1500 can accomidate 4 mr16 boards at once.
-
Hi Trekster, here you go,
I used a piece of blank PCB board material, cut it to fit, took an Express PCB, marked the mounting holes for the LE on the blank, drilled the holes for the case, marked and drilled the holes for the MR16 boards, used nylon bolts, spacers, and nuts for the MR16 boards, and screwed the blank PCB to the CG-1500 case, same as the LE. Works great.
-
Great idea! Thank you for the picture. I was wondering what I was going to use for a case. Now I know.
Ron