DiyLightAnimation
Store => Finished COOPS => Topic started by: Freebird on July 06, 2011,
-
This Coop will be for parts for the Lynx SSR4, the SSR4 DMX option, the SSR4 PCB, the Lynx DMX Splitter, and the Lynx Splitter PCB
The manuals, boms, etc, may be found in the wiki: http://diylightanimation.com/wiki/index.php?title=Equipment .
No kits will include the cases as it is just as cost effective for the users to order them.
By joining this Coop you also agree that the Coop manager, DLA (as a board to also include all administrators, moderators, and members) shall not be held for any liability. You are joining this Coop at your own risk.
As with any Coop this Coop is subject to the forum rules. These rules can be reviewed using the following link.
Forum Coop rules
http://diylightanimation.com/index.php?topic=111.0
The Co-Op will be limited to 150 total kits. This Coop will close on Jul 25th 2010 at 9:00 PM Pacific Standard Time or when 150 total kits have been reached. Once the Coop is closed I will send each member a PM with the details of their order and what payment is due. Full payment is expected when the coop is closed since orders cannot be made until all members have paid. Please get your PayPal payments in as soon as you get the Coop invoice PM. Please insure your PayPal address info is up to date. Shipping will be by the flat rate boxes and will be determined as soon as individuals' orders are known and which size boxes are needed.
Here are the pricing details at initial ordering amounts. Pricing includes PayPal 3% and Coop 3% fees. As always higher numbers reduce pricing and lower numbers increase pricing. Change your order as you wish during the ordering portion of the Coop, but please make sure I can tell which kits you are changing and desired numbers. Please check the order list that follows to make sure I don't miss your order or any changes as the Coop continues and at the end of ordering.
Kit 1 - Lynx DMX Splitter Parts Kit (No PCB)
Qty 50 - $18.59
Kit 2 - Lynx DMX Splitter PCB only
Qty 50 - $4.08
Kit 3 - SSR4 Parts Kit (No PCB)
Qty 50 - $12.42
Kit 4 - SSR4 DMX Option Parts Kit (No PCB)
Qty 50 - $16.75
Kit 5 - SSR4 PCB only
Qty 50 - $4.12
Post with the quantity of each kit you wish to order in this thread.
****************************************************
If you wish for insurance on the package you will need to check for the rate at USPS.com and add this to your PayPal payment. Then you must include in the PayPal comments that you want $xxx value insurance on the package. We cannot be responsible for lost or damaged uninsured packages once dropped off to USPS and we have a confirmation showing that they accepted and shipped it.
NOTE, to make LYNX Splitter you will need kit1 and kit 2. To make Lynx SSR4 you will need kit 3 and kit 5. TO make Lynx SSR4 DMX you will need kit 3, kit 4 and kit 5
-
Great!
10 of Kit #5
Thank you,
Kevin
-
Qty 2 of kit 3
Qty 2 of Kit 4
-
kit 3 qty 4
kit 4 qty 4
-
8 of kit 5
8 of kit 4
8 of kit 3 (thanks for the hint Freebird)
Thanks,
Bill
-
Qty 4 of Kit 4 - SSR4 DMX Option Parts Kit (No PCB)
I'm assuming Kit 4 includes the parts from Kit #1 as well?
Nope they are different parts. If you only have the pcb already then to make a 4 channel controller than get Kit 1 and 4
Hope that helps
Rick R.
-
1- KIt # 3
1- kIT # 4
1- kiT # 5
-
1 - Kit 1 - Lynx DMX Splitter Parts Kit (No PCB)
1 - Kit 2 - Lynx DMX Splitter PCB only
Please and thank you!
Ron
-
1 - Kit#1
1 - Kit#2
Thanks
-
I would like 2 of Kit 1 and 2 of Kit 2.
Thanks
-
Kit 5 Qty 5
Thanks
-
Member Kit 1 Kit 2 Kit 3 Kit 4 Kit 5 Paid
onesmoothhead 10 x
inzeos 2 2 x
i1uhrace 4 4 x
mordtech 8 8 8 x
holland lights 2 2 2 x
trekster 1 1 6 x
Rdwizard 1 1 x
lightingnut 2 2 x
gophergrove 5 x
MrChristmas2000 9 9 x
Corey872 2 2 x
marf 5 5 5 x
tng5737 1 3 2 2 x
mokeefe 3 8 x
mr2hogs 1 1 4 4 4 x
JDM1oc 2 5 x
sdrose 4 x
ponddude 5 5 5 x
loveroflife96 1 2 5 5 10 x
coachers 2 20 x
Ed Slonka Jr 1 1 1 x
pHoZfoRus 8 x
jess_her 1 2 1 1 4 x
k77rn 1 2 2 x
chrisatpsu 3 3 3 x
Mickpat 1 1 x
austindave 3 3 4 4 4 x
taybrynn 1 2 2 x
bwhite505 1 2 2 x
Rainlover 3 3 5 x
tbone321 8 8 4 x
Newoddity 1 1 1 x
_____________________________________________________________________
Totals 17 27 89 58 125
-
Qty 9 - Kit 3 - SSR4 Parts Kit
Qty 9 - Kit 5 - SSR4 PCB only
Note to all, to make a basic SSR4 you need Kit 3 and 5 if you want to add the DMX option you must ADD kit 4.
If you order just Kit 4 and 5 you are going to be dissapointed because there will be no output components.
I'm just saying.
Thanks for doing the coop.
Tom
-
2 of kit 3
2 of kit 5
Thanks,
Corey
-
I would like...
5 of kit 3
5 of kit 4
5 of kit 5
Thanks
Marf
-
Qty 4 of Kit 4 - SSR4 DMX Option Parts Kit (No PCB)
I'm assuming Kit 4 includes the parts from Kit #1 as well?
Nope they are different parts. If you only have the pcb already then to make a 4 channel controller than get Kit 1 and 4
Hope that helps
Rick R.
Typo on my part. What I mmeant to imply was, do you need both part kits to make a single dmx enabled ssr4?
Got my pcbs already.
-
kit1 = 1
kit2 = 3
kit3 = 2
kit4 = 2
-
Kit #5: Qty: 8
Thanks.
-Mike
-
changed my mind
2- Kit # 3
2- Kit # 4
2- kit # 5
-
1- Kit # 1
1- Kit # 2
4- Kit # 3
4- Kit # 4
4- kit # 5
Thanks,
-
2 of Kit 2 Splitter pcb
5 of Kit 5 SSR4 pcb
Thanks!
-
qty 4 of kit 5
Thanks for running this
-
Could you please adjust my order to:
Kit #2: Qty: 3
Kit #5: Qty: 8
Sorry for the change so soon.
-Mike
-
I would like:
5 of kit 3
5 of kit 4
5 of kit 5
Greg
-
Kit 1 - Qty of 1
Kit 2 - Qty of 2
Kit 3 - Qty of 5
Kit 4 - Qty of 5
Kit 5 - Qty of 10
-
Kit #1 - please put me down for 2
Kit #3 - please put me down for 20
Thank You!
-
OK...Please add 6 Kit 5 for me.
Thank You
Ron
-
Please put me down for the following:
Kit 3 - Qty 1
Kit 4 - Qty 1
Kit 5 - Qty 1
Thanks, Ed
-
8 x Kit #5
Thanks in advance,
Russell
-
Hello
Kit 1 1
Kit 2 2
Kit 3 1
Kit 4 1
Kit 5 4
Thanks for doing the CO-OP
Jess
-
I would like:
Kit 1 - 1
Kit 2 - 2
Kit 5 - 2
Thanks
-
Kit 3. 3
kit 4. 3
Kit 5. 3
For now :)
-
Kit #1 - Qty 1
Kit #2 - Qty 1
-
Kit 1 - qty 3
Kit 2 - qty 3
Kit 3 - qty 4
Kit 4 - qty 4
Kit 5 - qty 4
Thanks!
Dave
-
Kit 1 - qty 1
Kit 2 - qty 2
Kit 5 - qty 2
Thank you,
Scott / taybrynn
-
I would like the following:
Kit #1 - 1
Kit #2 - 2
Kit #5 - 2
Thanks,
Brian
-
I cannot resist a coop.
I need:
3 - Kit 3
3 - kit 4
5 - kit 5
Thanks,
John
-
I have been waiting for this and of course, almost missed it. Please put me dow for:
Kit #3 - 8
Kit #4 - 8
Kit #5 - 4
Thank you.
-
If I can squeeze in before the limit is hit.
Kit #3 - Qty 1
Kit #4 - Qty 1
Kit #5 - Qty 1
-
Qty 4 of Kit 4 - SSR4 DMX Option Parts Kit (No PCB)
I'm assuming Kit 4 includes the parts from Kit #1 as well?
Nope they are different parts. If you only have the pcb already then to make a 4 channel controller than get Kit 1 and 4
Hope that helps
Rick R.
Typo on my part. What I mmeant to imply was, do you need both part kits to make a single dmx enabled ssr4?
Got my pcbs already.
Yes, you need to orded both kits 3 and 4 to populate your board with everything needed to make a fully DMX enabled SSR4. One kit has the DMX components such as the pic and the RS485 and the other kit contains the output components such as the triacs an the opto's. They are two seperate things and the DMX kit does NOT contain the parts of the other.
-
All. This COOP is now closed for orders. We have reached the limit of 150 ( actually 156 total kits ). I will soon complete the next step in the coop and gather actual pricing and get PM's sent out to everyone as soon as I can. Please go and look at my post showing the totals and if anything is incorrect please let me know. Thanks for all that ordered and no one expected this much response for this COOP in only 2 days!!!
Freebird
-
I had ordered 6 PCB's (kit 5) to my order about half way down the list. I see you have not updated me.
Thank You So Much
Ron
-
Thanks for the correction, I had you on my list just didnt update it. got it right now.
Freebird
-
Okay, I have corrected some mistakes I made on the orders. I apologize with this being my first COOP. Once again, please check your orders against my list on the first page and let me know if I made any mistakes before I start getting actual pricing. Thanks all.
Freebird
-
Okay, I have corrected some mistakes I made on the orders. I apologize with this being my first COOP. Once again, please check your orders against my list on the first page and let me know if I made any mistakes before I start getting actual pricing. Thanks all.
Freebird
Note the change on my original post please.
-
Put me down for:
Kit #3: Qty 4
Kit #4: Qty 4
Kit #5: Qty 4
Thanx!
-
Put me down for:
Kit #3: Qty 4
Kit #4: Qty 4
Kit #5: Qty 4
Thanx!
Please read 5 messages before yours. The coop is closed.
-
Update**** Price quotes are in and Payment Pm's will be sent out shortly.
>.d9
Freebird
-
All Payment PM's have been sent. If you didnt get one please let me know. Just a reminder that the sooner I get all payments the sooner I can order all your stuff!!!. ;D
Freebird
-
Almost 1/2 of the payments have been made!! ;D Awesome quick responses from everyone so far. At this rate parts may be ordered real soon!!
Freebird
-
12 Payments to go and parts can be ordered!!! Great job so far everyone!!. Your making it easy on a newbie Coop Manager!!
:D
Freebird
-
10 payments to go....... thanks all!!
Freebird
-
I will be making my payment Friday morning. Yay for payday.
-
Hey i know your knew and all with the coop stuff. But i want my parts the day after you get it. jk
-
I will be making my payment Friday morning. Yay for payday.
No problem at all!!. I just like keeping everyone up to date as much as possible. :)
-
Hey i know your knew and all with the coop stuff. But i want my parts the day after you get it. jk
What? You dont want them the day before??? :D
-
Hey i know your knew and all with the coop stuff. But i want my parts the day after you get it. jk
What? You dont want them the day before??? :D
Yea your kindof slow, make there payments for them, then wait on the cash from them. Then you can get orders in much faster.
-
Hey i know your knew and all with the coop stuff. But i want my parts the day after you get it. jk
What? You dont want them the day before??? :D
Yea your kindof slow, make there payments for them, then wait on the cash from them. Then you can get orders in much faster.
Its very tempting. very... I am not a patient person and I love to solder, so I thought about it... then the Mrs. brought me back to earth with a slap on the back of the head....
;D
-
Only a few more payments and orders will be made!!!.
Freebird
-
Hey i know your knew and all with the coop stuff. But i want my parts the day after you get it. jk
What? You dont want them the day before??? :D
Yea your kindof slow, make there payments for them, then wait on the cash from them. Then you can get orders in much faster.
Its very tempting. very... I am not a patient person and I love to solder, so I thought about it... then the Mrs. brought me back to earth with a slap on the back of the head....
;D
lol yea. if you love to solder, wont you come out with your own controllers.
-
Only 6 more to go . . . . . . <pop..
Come on folks, lets get this rolling early.
-
Less than 1 week until payment deadline and only 4 left to go!!! :)
Freebird
-
sorry, for my delays, guys... been staying at in laws while i remodel house
<md.. goes the living room walls >.d9
-
sorry, for my delays, guys... been staying at in laws while i remodel house
<md.. goes the living room walls >.d9
Making more room to solder and store your Christmas lights?? LOL
-
2 1/2 to go. ( One gave me a date when it would be paid).
;D
-
1 1/2 to go. Almost there and I can place the orders!!!
Freebird <res.
-
Well, One more payment to be made. BUT!!! :o I went ahead and placed the order for parts and PCBS today!! Will keep you all up to date as progress continues on this COOP.
Freebird
-
What song is it you wanna hear...... FREEBIRD!
I heard you that time....
Lynyrd Skynyrd
A coop on order is worth 2 in the bush.
Thank you Mr Bird!
Ron
-
A coop on order is worth 2 in the bush.
Thank you Mr Bird!
Ron
LOL ;D
-
PayPal payment sent!
Sorry for the delay, was on vacation without access to a computer secure enough to warrant logging into PayPal from. In before the dead line of tomorrow though ;)
Yay for blinky!
-
Some parts have arrived today. Awaiting more deliveries before sorting can begin. 8)
Freebird
-
Parts were sorted and some bagging began today. I know how everyone likes to see their name during the coop process so I included a few pictures. All chips were programmed tonight!!
-
Nice! Thanks for the update.
-
Mine is in there :)
-
SQUEEE!
I am start a BA group. Blinkies Anonymous is for those of us that admit we have a problem, but are proud of it.
-
Weekly Update
Awaiting PCBS and all parts will be shipped!!!.
Freebird
-
Update: PCBS will ship late next week. Those that did not order any PCBS your package shipped today and you should have received an email with tracking number. I have all packages packed and ready to go so once the PCBS come in, it will be a quick slip them in, seal up the box and ship off to you!! Thanks all for the patience.
Freebird
-
It pays to have the card!
Thank You
Ron
-
<la.. LOL!
Thanks for hard work Freebird!
-
LOL That is funny stuff.. I printed it off and laminated it, and placed it in my wallet to use the next time I get pulled over for SPEEDING!!
Freebird
-
LOL That is funny stuff.. I printed it off and laminated it, and placed it in my wallet to use the next time I get pulled over for SPEEDING!!
Freebird
Let me know if it works. Unless you get pulled over by Santa Claus, I doubt it will help. :o
Ron
-
Did the PCBs ship?
-
Just got in from family vacation and the PCBS arrived on Saturday. I will be getting them from the PO on Monday and preparing everything to ship this coming week. Be watching your emails for shipping information.
Freebird
-
Everything has shipped!!. Enjoy!! let me know ASAP if your order is not correct, I just did return from vacation and my mind is not yet right spending a week in the car with all of my kids!!
;D
Freebird
-
Absolutely fantastic. I could not have had a better experience for my first COOP. I cannot wait until the pieces come in.
-
This is one thing I have noticed about RJ and members of this board - they go beyond the call of duty to make sure EVERYONE is happy no matter what the problem/situation is/was.
I look forward to getting into my 1st CoOp as well.
Thanks for the hard work put in on this board everyone...
Myk
-
I got my Lynx DMX Splitter in the mail today. Thank You!
Are the SSR4 PCB's shipping separately?
Ron
-
Freebird, recived my package today thanks for doing the COOP Jess
-
Mailbox full of joy when I got home! Thanks for running the co-op!
-
I got my Lynx DMX Splitter in the mail today. Thank You!
Are the SSR4 PCB's shipping separately?
Ron
They are on their way to your doorstep!!
Freebird
-
Got all my stuff today as well. Thanks for a very smoothly run COOP! ;D
Greg
-
hey all, Check your packages carefully please. Im short 3 splitter PCBS and I may have accidentially misplaced them as SSr4 PCBS. If you got them pm me and I will get you the right ones etc. Thanks
Freebird
-
Never mind being short the 3 splitter PCBS. The member found them wrapped in bubble wrap. On the medium flat rate box shipping I did wrap the the PCBS and taped them up to help with them not moving around much during shipping.
Freebird
-
Received mine Friday ... great job, you never would have guessed you were a rookie ;D
Thanks for a great coop.
MR2
-
The horse drawn carriage brought mine to my house in MS on Friday as well. Thanks for all the work! Now to start sequencing and continue building.
-
Got back from trip and the package was here. Three Cheers. ;D ;D ;D
Very well packed and arrived in excellent condition.
Thanks for all your hard work. <res. <res.
Tom
-
Mine arrived ... everything is great ... thanks for doing this COOP !
Scott
-
Arrived in good order here in CA. Awesome job!
Josh
-
Checking the tracking on all these, it looks as if everything has been delivered except the one that went over seas. If anyone has any issues PM me right away, otherwise I don't see a problem if one of the MODS would like to move this to the finished coop area. Thanks all, and thanks RJ for letting me run it.
Freebird
-
Thanks Freebird - received in Brisbane Australia OK.
Russell