DiyLightAnimation
Hardware => Lynx Smart String => Topic started by: travailen on December 03, 2012,
-
I am using the Ver1 and Ver2 SSCs modified to Ver3. I am using the Mod 3 firmware. I am using the Smart String Utility that has the grouping feature. I think that is the latest one.
I have discovered that programming an SSC set for backwards and grouping of 1 works OK. However, with the direction set for backwards, the SSC will not function properly if the grouping is set for 11 or 12. That is the only numbers I have tried as I am trying to get my show running.
Essentially, grouping does not seem to work in the backwards direction.
Rick S
-
I have two strips forward and two strips backwards, but didn't do grouping on either. I may test if I get a chance.
-
I'm doing groups of 15 on my arches tonight, I'll report how it works. Going forward only.
-
I am using grouping on my candycanes. Everything works fine in the forward mode. I also use the backwards mode with 1 in the grouping number with no problem. The problem is when I did a grouping of 11 or 12 in the backwards mode.
Rick S
-
My groups of 15 (forward) on the 120 node SS flex strips work great !! Turns them into an 9 channel arch ... which is very compatible with most legacy arch sequencing I have. I do have to type in the 15, since you can't pick it from the drop down ... but it works great.
-
I am using grouping on my candycanes. Everything works fine in the forward mode. I also use the backwards mode with 1 in the grouping number with no problem. The problem is when I did a grouping of 11 or 12 in the backwards mode.
Rick S
How are your "multiples"?
I mean, in reverse, is your number of pixels evenly divisible by your group value? It must be or you'll get weirdness.
Forward isn't picky.
Backwards will be.
Sent from my DROIDX using Tapatalk 2