DiyLightAnimation
Hardware => Lynx Smart String => Topic started by: zwiller on November 23, 2012,
-
I have one pixel (#14) on a flex strip mounted to frame that I really don't want to splice out. It goes pink when programmed for a start channel but is fine with test firmware or white flashing with programming. Tried different sscs, reflashing, restarting pic ware, restarted channel utility. Any thoughts?
-
the node is flaky ?
Rick R.
-
Yes but only when programmed. Strip was burnt it for hours and was fine.
-
Just swapped it and same pixel is out on another strip. I seem to recall this is similar to the boundary pixel issue. It's channels 3,582-4. Gonna try to move channels around a bit to see if this helps.
-
I found a similar issue with boundary pixels on my smart strings when using e131 over DMX. I had to move the entire window frame to a new "universe" in LSP
-
OK. I am done for today. Was trying to get some lights up but it's just one them days... <fp. Programming my ssc's was a nightmare.
(grabs a homebrew)
Now around channels 5320 it starts getting much worse. Larger sections out and finally around 5600 half the strand is out. I am running etherdongle with pixelnet with LSP. Starting to wonder if it is LSP. Running 2.5 but one or two update behind on my work pc. Downloading now.
-
Installed latest updates for LSP and no dice... Reflashed hub, no dice...
In actuality I am only running about 4k pixels with 2 universes so I have some wiggle room, I am just trying to nail down what is going on. On a positive note, I am happy I decided to test the programmed ssc's before I spent the day putting my elements up ;D
Wife says if nothing else get the star up running test firmware. Our favorite new element this year. Wood frame, fluorescent light lens, with 36 rectangular ss nodes.
-
at least test your channels with xLights. See if your hardware or if its software issue
Rick R.
-
I think I figured it out! I had the old firmware for the etd. Updated and reflashed and all is working good so far. That's what I get for testing all year long starting with channel 1... 8)
-
Sorry I didn't see this earlier - I had a similar moment of horror earlier in the year when I started testing my Etherdongle that was running the old firmware. Upgraded and resolved the issue. Glad it's working!
Looks just like my star! :)