I just wanted to share that I've had good luck so far with these spacers I found at HD.
I used these as standoffs when mounting the LE in the CG-1500 enclosure.
You can cut them and they are stackable (kind of like legos?) ...
For $6 ... you get 25 of them ... and thats enough for 12-24 cases. I used two doubled up on the bottom and top of each board ... and that takes 2 strips per board, so you can do 12 boards on one pack.
They are not perfect, but pretty decent. I'm sure could be done cheaper, but I was happy with this and a lot cheaper than buying spacer in the hardware department.
home depot part# 172451
You are not allowed to view links.
Register or
Login