Pete,
BTW in hybrid mode all the pixels respond to what the first pixel is asked to do.
I started my addressing at 513 because I am having to reserve the first block of addresses for DMX because of the bug in the e-dongle firmware and I don't know when it will be fixed.
This leaves me with the following addressing:
The first three addresses are:
513 - Red
514 - Green
515 - Blue
Because I have set my strings to the Hybrid mode these three channels control the way the complete string responds to commands.
If I move over to Channels 516, 517, and 518 only pixel 1 will respond etc. Thats why you have to reserve 86 channels for hybrid mode vs 85 for string mode.
If in LSP I can either click the 'ON' button or move the slider on channel 513 I get red
Then I turn the slider off
Then I can click the 'ON' button or move the slider on channel 514 I get Green
Then turn the slider off or click the 'off' button
Then I can click the 'ON' button or move the slider on channel 515 I get Blue
Then I turn the slider off or click the 'off' button
If I click both the 'Red' and 'Green' 'ON' buttons I get a yellow color then I click both 'OFF' buttons.
If I click both the 'Green' and 'Blue' 'ON' buttons I get a cyan color then I click both 'OFF' buttons.
If I click both the 'Red' and 'Blue' 'ON' buttons I get a magenta color then I click both 'OFF' buttons.
Now I have 2 videos made with the same LSP program and the same pixel string in the other 2 videos.
The first shows the 'white' flashing of the string and that pixel 1 is not alternating colors like it did in V2 setup programing.
You are not allowed to view links.
Register or
LoginThe second video shows the LSP test of the various colors as described above and in the video.
You are not allowed to view links.
Register or
LoginThis was done by simply switching out the SSC V2 with a SSC V1 unit. Nothing else changed. Both programmed EXACTLY alike.