DiyLightAnimation

Software => Light Show Pro => Topic started by: Christmasaddict on November 26, 2012,

Title: Changing channel configuration
Post by: Christmasaddict on November 26, 2012,

I am asking this here because I can't log in to the LSP site.  I am using 3 LE's but only utilizing 44 channels leaving 4 free.  I am having trouble with my LE channels 32 and 33.  Both have decided not to work even though I replaced the opto and triac.  Question is can I go into LSP and change channel 32 to channel 45 and channel 33 to 46.  This would move the channels from one LE to another.  Will this fix work or am I just going to screw things up even more?  Hopefully this question makes sense.

Title: Changing channel configuration
Post by: sebjsan on November 26, 2012,

Right click channel and change address.

Title: Changing channel configuration
Post by: mitch09 on November 26, 2012,

You can drag the channels to any order you want. Then just renumber them when finished in each controller

Title: Re: Changing channel configuration
Post by: Christmasaddict on November 26, 2012,

Thanks for the prompt responses.  Made the changes and the show is back up and running!! :)