Hardware > Lynx USB DMX Dongle

Help something wrong with Dongle and FTDI

<< < (5/5)

enjoylife22:
tbone I thank you for all the help you are showing me I appreciate it soooo much.  Now I unplugged the dongle reflashed pic to dmx and plugged it directly into the LE and no go nothing at all.  It won't light up anything so I am going to reflash it back to pixelnet and see what happens.  I was using dmx deck.

tbone321:
Make sure that you are using the DMX Pro setting and not DMX open.  The dongle will not work with the open driver.  I would also look into the opto-coupler and if you have a spare, swap it out.

enjoylife22:
tbone again I thank you so much.  I finally figured it out by going back and forth back and forth over what I did to get it to work.  What was happening is when I would plug in my pickit3 it was going to port 3 designation same as the dongle only it was going in as a interface.  So I change the comport to 5 and away it went.  I did find one scc that is not working so far so I will have to trouble shoot that next.

caretaker:
If you haven't already download the FTDI drivers:
32 Bit: You are not allowed to view links. Register or Login
64 Bit: You are not allowed to view links. Register or Login
Install the driver THEN plug in the dongel.

Navigation

[0] Message Index

[*] Previous page