DiyLightAnimation
Store => Finished COOPS => Topic started by: RJ on January 05, 2011,
-
I am currently out of Dongle pcbs but we have a bunch of new users needing them so I am planing to order a batch. I normally open a pcb only coop for them to try and get them number up and keep the cost down. This will be only for the Printed Circuit Board and is not a kit with parts.
This coop will close on Jan 30th at 8:00 pm E.S.T.
The pcb prices will vary greatly with amount so this is a current estimate. I will post the final prices once the coop closes and you can drop out at any time until the order is placed. All coop rules apply. Coops rules have been updated please read them in the first post at the top of this board.
Pm's will be sent to each member at the close of the Coop with the amount and instructions for Paypal. No money is collected until then.
I am quoting 50, 100, 250.
We must hit 50 for me to order any.
qty Price
50 $3.90
100 $3.01
250 $2.51
Mail charges will be for up to four of them for $3.75 in the US and $8.00 outside the US.
Additional will require some additional postage.
Post in this thread and state the quanitity of pcb's you need.
Thanks
RJ
-
Member Name | Ordered | Paid |
abrianbaker | 4 | Y |
aERonAUtical96 | 1 | Y |
akonkman | 4 | Y |
Al | 2 | Y |
albaughed | 2 | Y |
artzy | 2 | y |
Asterix0 | 4 | Y |
asylvest | 4 | Y |
austindave | 2 | Y |
barbotte | 4 | Y |
batdive | 4 | Y |
bcstuff | 4 | Y |
BigVettePimp | 4 | Y |
brittio | 4 | Y |
bwhite505 | 4 | Y |
c56 | 4 | Y |
CaptKirk | 4 | Y |
caretaker | 4 | Y |
CB | 5 | Y |
cbeaudry | 4 | Y |
cBell | 2 | Y |
chrisatpsu | 6 | Y |
ChrisB | 4 | Y |
ChristmasattheY | 2 | Y |
CJ | 4 | Y |
cody33rd | 4 | Y |
combustionmark | 12 | Y |
complacent_one | 4 | Y |
comporder1 | 4 | Y |
csf | 4 | Y |
cubbieco | 4 | Y |
CW | 4 | Y |
D56VillageNut | 4 | Y |
DanHouston | 2 | Y |
dannyct | 4 | Y |
Dave H | 3 | Y |
David Campbell | 2 | Y |
dbeau | 4 | Y |
dcwehw99 | 4 | Y |
deanathpc | 4 | Y |
Dennis Cherry | 4 | Y |
deweycooter | 3 | Y |
Dholley | 4 | Y |
diceman3807 | 6 | Y |
DilA | 2 | Y |
dilgod | 4 | Y |
dlhoppe | 2 | Y |
dmaccole | 2 | Y |
dpitts | 2 | Y |
dschultz | 2 | Y |
Dude_From_WA | 4 | Y |
dunnsr | 2 | Y |
EasyGo | 4 | Y |
ebrady | 4 | Y |
egenoup | 4 | Y |
einstein2883 | 2 | Y |
elcommandante | 4 | Y |
eyearedan | 7 | Y |
fbinthesouth | 8 | Y |
fertsy | 4 | Y |
FireMedic4Christ | 2 | Y |
fjaust | 4 | Y |
FlashG | 3 | Y |
foodseller | 4 | Y |
foxathome | 2 | Y |
FredS | 4 | Y |
fslopez1950 | 4 | Y |
galgon | 4 | Y |
Garyi | 2 | Y |
gforman | 6 | Y |
glinn | 3 | Y |
gmcmaxx | 4 | Y |
gophergrove | 4 | Y |
GotBeer | 2 | Y |
gunther | 4 | Y |
gzformula | 4 | Y |
harleyhaynes | 2 | Y |
Hod | 4 | Y |
i1uhrace | 4 | Y |
icky007 | 1 | Y |
ILOVETOTRYDIY | 2 | Y |
IndianaChristmas | 2 | Y |
inittab | 4 | Y |
inzeos | 4 | Y |
jasonf | 2 | Y |
JDM1oc | 4 | Y |
jekalaka | 4 | Y |
jem5136 | 4 | Y |
JerryPlak | 4 | Y |
jess_her | 4 | Y |
JimWright | 2 | Y |
John K | 4 | Y |
johno123 | 2 | Y |
JonB256 | 4 | Y |
joshuashu | 2 | Y |
jrtem9 | 1 | Y |
Jugster | 3 | Y |
Kainsel | 4 | Y |
kalstatt | 1 | Y |
kauthier | 2 | Y |
kbowen | 2 | Y |
keitha43 | 2 | Y |
kenjreno | 2 | Y |
kevr | 4 | Y |
kfxi | 3 | Y |
kgustafson | 4 | Y |
Khaler | 8 | Y |
kj77rn | 4 | Y |
kjam22 | 4 | Y |
kjburns31 | 10 | Y |
kpurcell | 2 | Y |
krgoodwin | 2 | Y |
kylec | 4 | Y |
L8teron | 2 | Y |
laser633 | 2 | Y |
LasVegasF250 | 2 | Y |
lboucher | 3 | Y |
lburnham | 2 | Y |
lightguy | 4 | Y |
lightsup | 2 | Y |
lineman | 5 | Y |
Livermore-Dad | 4 | Y |
LondoB5 | 8 | Y |
lonewolf41 | 4 | Y |
loveroflife96 | 4 | Y |
lowrider3121 | 4 | Y |
Lucas | 4 | Y |
Made2Rock | 2 | Y |
maffeirw | 4 | Y |
magic8192 | 4 | Y |
magii | 4 | Y |
mahoo313 | 2 | Y |
matt_grooms | 4 | Y |
mcangeli | 2 | Y |
melwell | 4 | Y |
memphislights | 5 | Y |
Mickpat | 2 | Y |
mike_ca | 4 | Y |
mike2tall | 5 | Y |
mikedbom | 1 | Y |
mimiyum | 4 | Y |
mitch09 | 4 | Y |
mmciver | 4 | Y |
mmulvenna | 8 | Y |
mnarel | 4 | Y |
mokeefe | 4 | Y |
moocox | 2 | Y |
mordtech | 2 | Y |
mr2hogs | 4 | Y |
MrChristmas2000 | 2 | Y |
Muskogee Gene | 4 | Y |
n1ist | 2 | Y |
NavyGator | 4 | Y |
njKeever | 10 | Y |
nutshy | 2 | Y |
odlids | 4 | Y |
OkieJay | 3 | Y |
OneHotRT59 | 4 | Y |
onesmoothhead | 4 | Y |
packetbob | 2 | Y |
Pacman | 6 | Y |
paul58 | 4 | Y |
paulcimn | 8 | Y |
pdman | 4 | Y |
pete peters | 4 | Y |
pHoZfoRus | 6 | Y |
pircy | 4 | Y |
PJNMCT | 2 | Y |
pk | 3 | Y |
pmcdaniel | 2 | Y |
pokey | 4 | Y |
ptone | 2 | Y |
pugs1501 | 4 | Y |
Rainlover | 4 | Y |
Ralph A | 2 | Y |
ratroder | 2 | Y |
rayster | 4 | Y |
razorblade54 | 3 | Y |
rcouto | 4 | Y |
rdebolt | 8 | Y |
remixsam | 4 | Y |
richagem | 4 | Y |
rick surette | 4 | Y |
RickeyS | 4 | Y |
RickLBZ | 4 | Y |
rm357 | 2 | Y |
robelent | 3 | Y |
RogerA | 2 | Y |
rogerwh | 4 | Y |
ron d | 4 | Y |
ronniek | 4 | Y |
Sabre03 | 2 | Y |
sakkk05 | 2 | Y |
scharbon | 2 | Y |
scottmc70 | 4 | Y |
sdrose65 | 2 | Y |
SeaHoCaptain | 4 | Y |
Segull | 4 | Y |
simultekie | 4 | Y |
sirloinofbeef001 | 2 | Y |
sirwesley | 2 | Y |
skulldan | 2 | Y |
Sly | 2 | Y |
smartcontrols | 4 | Y |
soakes94 | 2 | Y |
soundmankc | 2 | Y |
Sparky96 | 4 | Y |
spider236 | 2 | Y |
steve hughes | 5 | Y |
steve_hirst | 4 | Y |
supergumby | 5 | y |
TAdamsOK | 4 | Y |
tallan | 4 | Y |
tangouno | 4 | Y |
taybrynn | 2 | Y |
teager23336 | 4 | Y |
tennhillbilly | 4 | Y |
TexasStingray | 4 | Y |
TheBanker | 4 | Y |
therealbigjim | 2 | Y |
Tigman009 | 1 | Y |
Tiny Terrors | 2 | Y |
TMB | 4 | Y |
tng5737 | 2 | Y |
tombmatt | 2 | Y |
tonypgst | 2 | Y |
tonyv2842 | 4 | Y |
tpboyce | 4 | Y |
tpro | 4 | Y |
trekster | 4 | Y |
Trepidati0n | 4 | Y |
tri_slarson | 2 | Y |
tthompson | 4 | Y |
txburr | 2 | Y |
urthegman | 2 | Y |
vairmoose | 4 | Y |
verticalrider | 2 | Y |
wadeduck | 4 | Y |
warspyder | 4 | Y |
Watsont79 | 4 | Y |
wbuehler | 4 | Y |
wftxlites | 2 | Y |
wjgiles50 | 2 | Y |
wrwelect | 2 | Y |
wwwgator | 4 | Y |
zman | 4 | Y |
zwiller | 2 | Y |
Total : | 864 | |
258 Members | | |
-
I'll take 4 RJ, Thanks!
-
4 please
-
I'd also like four (4).
Thanks,
Duane
-
2 Please
-
I'll take 4, Never know when you'll need more.
-
I would like two please.
-
Two please.
-
Will take 2 Please RJ Thanks
-
I would like 3 please.
Thanks,
Jay
-
3 boards here please. >.d9
-
As a newbie here do I need to order the PCB now then wait for a kit coop or will you be doing a kit with PCB coop later this year?
Thanks
Gordon
-
Please put me down for 4.
Thanks,
Ronniek
-
Two please.
Thanks.
\dmc
-
Please put me down for four (4) please and thank you.
Ron
-
I would like 4 as well please.
Thanks,
Jon
-
4 for me please.
RJ you da man <res.
-
Put me down for 4 as well.
Thanks
-
please put me down for 6
thank you RJ
Glen
-
It looks like we hit the 50 mark in a matter of hours.
Put me down for 4.
-
As a newbie here do I need to order the PCB now then wait for a kit coop or will you be doing a kit with PCB coop later this year?
Thanks
Gordon
There is no kit coop for the PCB. The part savings is negligible as stated on previous occasions.
This is a good way for you to get your first dongle PCBs.
-
Ill take 3. Please note that I just sent you a message before I saw this coop. I dont want you to double count me.
-
I will take 4 please.
Thanks,
John
-
Put me down for 4 boards.
-
Put me down for 4
Thank u
-
8 for me please
-
I would like to order 4 boards please.
Thank you!
-
I'll go with 6
-
As a newbie here do I need to order the PCB now then wait for a kit coop or will you be doing a kit with PCB coop later this year?
Thanks
Gordon
There is no kit coop for the PCB. The part savings is negligible as stated on previous occasions.
This is a good way for you to get your first dongle PCBs.
Wow, I would not have thought that but the USB module (the main cost of the dongle) just really does not get any cheaper with quantity:
1: $25.00
25: $24.00
50: $23.25
100: $22.40
That would NOT be worth running a COOP would it...
When you order your parts at Mouser, I suggest ordering the resistors in minimum numbers of 10 as you can basically get some free resistors for your parts stores that way (it really drops the unit prices). I just figured that out ordering up parts for two dongles!
-
I'm in for 4.
Just a quick question, is this the current dongle or is it the one that has been hinted at the 16,000 channel that has been popping up in various threads?
-
I would like 4 please.
Thank you RJ
-
2 please kind sir
-
I will take 4 please
-
Please put me in for four (4)
-
I'll take 6 please... ;D
-
I'll take two please.
Thanks.
-
I'll take 4 please.
Thanks,
Tracy
-
Put me in for 2.
I need to get started somehow !!
DIY Newbie !!!
-
Please put me in for 2...not delaying on this one!
-
RJ,
I'll take two Please
Thanks,
Bill
-
Sign me up for 4.
David
-
I would like 2 boards.
Thanks,
Rich
-
I'll take 2. ;)
-
I will take 2 dongles please
-
I'll take 2.
thanks
Bob
-
I'm in for 4.
Just a quick question, is this the current dongle or is it the one that has been hinted at the 16,000 channel that has been popping up in various threads?
This is a standard Lynx DMX dongle that can do a universe of DMX (512) or can be flashed to do a universe (4096 ch)of PixelNet.
The ethernet dongle will not be avaliable for a while yet. It will need to complete a full beta.
RJ
-
I would like 2 please.
-
I would like 4 please.
Thanks,
Egen
-
once flashed for pixelnet, can it be later flashed for dmx universe?
-
4 for me please.
Thanks,
Roger
-
once flashed for pixelnet, can it be later flashed for dmx universe?
Yes
-
Four please.
-
I would like 4 please. Thanks RJ!
Dean
-
2 please
-
4 please
-
4 for me RJ! Thanks!
-
I'll take 4! When you release the updated dongle for smart strings that can handle 8 universes, will the same board be used with different components or will it just be a firmware upgrade?
-
I think I'll give this a try.
Put me down for 2.
-
I'll take 2 please
-
4 please
-
4 please
-
I'll take 4! When you release the updated dongle for smart strings that can handle 8 universes, will the same board be used with different components or will it just be a firmware upgrade?
I believe that the new dongle will put out 4 universes and doing that would require it to use all 4 pairs in the Cat 5 cable which would require a new board for that alone.
-
Put me in for three please.
-
4 for me please.
Thank you.
-
For a new DIYer waiting patiently to start from scratch - this is like Christmas again!
Please put me down for 6.
Thank you for the time and effort of sharing your knowledge and experience RJ.
Russell
-
5 Please. Thanks RJ
-
I'm going to go with ten please. Thank you!
-
Please put me down for 4.
Thanks,
Jerry Plak
-
I'll take 4! When you release the updated dongle for smart strings that can handle 8 universes, will the same board be used with different components or will it just be a firmware upgrade?
Totally different hardware.
RJ
-
1 Please.
-
JSO with DMX this year. I'll take 2 please and thank you
-
RJ
Please put me down for 4!
Thank you!
Mike.
-
RJ,
Please put me down for four.
Thanks,
Brian
-
I'll take 4. Thanks
-
Can I have 2 please
-
I'll take 3. thanks.
-
4 for me please
Cheers Kev :-)
-
5 please
-
I would like 4.
(Yes, made it into this coop! :) )
-
4 for me please!
-
RJ.. Please add me in for 4 boards.
Larry
-
RJ-
I'll take 2. Thanks.
/mike
-
4 (four) pcb's for me thanx
-
I would like 12.
Who makes your boards?
Great price.
Thanks
-
4 please
-
4 please.
It appears there is not much interest in dongles?
-
Please put me down for 4
-
I'll take 4. Much appreciated :)
-
Please put me down for 3
-
anyone know the maximum number of dongles a pc (or vixen) can recognize?
-
I'll take 4.
Thanks
Ryan
mitch09
-
PLEASE PUT ME DOWN FOR THREE PC BOARDS
KEN
-
I will take 2 please. Thank you!
-
I will take 2 please.
-
RJ,
Please mark me down for 3.
Thanks
Chris
-
I will take 8 please.
Thanks.
-
put me in for 4.
thanks RJ
-
with the reduced price, it hurt to get a couple more. i get 2 more for a total of 8 from me.
-
Hi, I'll take 4 please.
-
4 please
-
Put me down for 4
Thanks
-Tory
-
Hi RJ
I'll take two please.
Jim
-
I would like 2 please.
Thanks,
Robert
-
Put me down for 4 please.
-
I'll take 4 Please.
Thank you RJ
Joe
-
I'll take 4 Please
Liber
-
Four for me ,Please Thanks
-
Can I take 2 please
Thanks
-
4 for me please!!
I will start prepping for SS!! Kirk
-
1 please
-
3 please
-
4 Please and thanks RJ
-JS
-
I will take 2 please.
-
I'll take 2 please.
-
Put me in for two (2)
-
Rough count looks like around 370 at this point! Wow there was demand.... Mouser is gonna need a bigger shipping department!!
-
wow, i'd hate to see what the grand totals are by jan 31st :o
-
I would like 2 please
-
RJ,
I previously asked for 2 (two)
Up that order with 2 more for a total of 4 (four)
Thanks Again,
OneHot RT59
-
Just beginning the adventure with DMX. I'll take 4 please. Thanks!
-
I would like 2 please
Thanks for running this
-
4 please.
Thanks,
-Keith
-
4 for me.
Thanks.
-
I'll take 4.
Thanks
-andrew
-
5 Please
Thanks
-
Time to get started, I would like 3.
Thanks
-
(4) Four, Please
Pete Peters
-
I would like 4 please >.d9
-
2 Please and Thank you.
-
any price breaks for 500+ lol
-
four for me please
-
RJ,
Please add 2 to my request for PCBs for a total of 6.
Thanks,
Jon
-
I am in for 4. Thanks!
-
Can you increase my order from two to four.
Thanks,
Rich
-
I would also like to up my order from 2 to 4. Thank you.
-
I would also like to add 2 more to my order so now I would like (4) total
-
I'll take 2, Thanks.
-
I would like 4, Thank you RJ
-
Please put me down for 2 dongles!
-
Not sure what happened to my first post...so I'll post again.
Please include me for 2 Dongle PCB's. Thanks again.
-
I'll take 4 please, thanks
-
RJ would you up my order from 2 to 4 please.
-
Please put me down for 2.
Thanks!
Rm
-
I need 4 please. Thanks RJ
-
Hi RJ,
I am good for 4.
Thanks,
Craig
-
Please put me down for 4.
Thanks
Alan T
-
please put me down for 2.
thanks, scott
-
Put me down for 4 or them, please.
-
I'm in for 4 please.
Thanks!
-
Sign me up for 4, please!
-Rick
-
Hey put me in for 4
- Harvey
-
Put me in for 4 please.
UPDATED REQUEST
David
-
4 please.
-
Please put me down for 2. Thanks.
Sly
-
Put me in for 2.
Thanks
-
RJ,
put me down for 4 boards please, might as well start somewhere and also get spares at this price
Thanks
Gordon
-
RJ,
Happy holidays. please put me down for 2 PCBs.
Thank you
<md.. Caliente Christmas <md..
-
I would like 2
Thanks RJ
Dan
-
I would like 1 please
Thanks for all you do for us
Mike
-
Please put me in for 4.
Thanks!
Tony
-
Please put me down for 2 each.
Thanks, Greg
-
RJ
Add me in for (4) PCB
Thanks CJ :o
-
RJ could you please increase my order from 2 to 4. Thank you.
-
Please increase my order from 2 to 4 as well.
Thanks,
Joe
-
I put in for three. Please increase me to four.
Thanks.
-
Please add 4 to my order please RJ for a total of 8
Thanks,
Roger
-
Put me down for 4!
-
2 for me please.
Thanks for all you do for DIYers.
Brian
-
Have some friends who want to go blinky flashy....4 for me too please
Jon
-
I'll take 2, thanks. :)
Leni
-
RJ,
I would like to pick up two please.
Thanks,
-Paul
-
I will take 4
-
Just "in case" and before it closes, put me down for 4.
JonB
-
I would like to order 4 of the dongle PCB's please.
A hearty thank you as well!
foodseller aka foody
-
I would like to order 5 of the dongle PCB's.
Thanks,
Mike
-
May I have 2 please.
-
4 for me please!!
-
I'll take 2 please.
-
put me down for 2 of these.
-
You can put me for 2.
Thanks
-
Put me down for 8
-
Could I have 2 please? Thanks
Steve
-
RJ,
I forgot that the smartstrings will also require a dongle. Please change my order request from 4 to 8.
Thank you!
-
I put in for 3 but would like to increase my order to 4.
Thanks,
Rich
-
2 for me please.
Thanks,
Sam
-
Hi RJ,
I'm definitely a newbie and still learning what is all needed, but I know this is a big part of it. So I'll get in on my first Coop and get 4 of these. Everyone says it's good to have a spare, shipping is same for up to 4, and I'm new at soldering too so just in case I mess one up haha.
I need to go back and find the parts list for Mouser for these now.
Thanks.
-
Just to make sure I'm doing this right, this is the right BOM for this board correct? So it's $46.13 to build one board, and with this PCB and this BOM it's everything needed to make the Dongle work?
-
Just to make sure I'm doing this right, this is the right BOM for this board correct? So it's $46.13 to build one board, and with this PCB and this BOM it's everything needed to make the Dongle work?
This will provide the hardware. After building the dongle, your next concern is flashing the pic with the current firmware and then housing the dongle. Finally, make sure that you have a good cord to connect the dongle to the computer.
Larry
-
Just to make sure I'm doing this right, this is the right BOM for this board correct? So it's $46.13 to build one board, and with this PCB and this BOM it's everything needed to make the Dongle work?
This will provide the hardware. After building the dongle, your next concern is flashing the pic with the current firmware and then housing the dongle. Finally, make sure that you have a good cord to connect the dongle to the computer.
Larry
Oh..I thought it came already programmed. Thought I had read that somewhere, but guess I was wrong. I'll have to do some more reading on how to get that done - LOL. I'll have good Cat5 cable for connecting it to the computer, but will have to find an enclosure. .
Thanks.
-
I would like 3 please.
Jim Sharp
-
Oh..I thought it came already programmed. Thought I had read that somewhere, but guess I was wrong. I'll have to do some more reading on how to get that done - LOL. I'll have good Cat5 cable for connecting it to the computer, but will have to find an enclosure. .
Thanks.
From what I've read, PICs are only programmed when supplied as part of the COOP kit - this COOP is not for the whole kit just the PCB so you need to either flash it yourself or check the list in the WIKI for a member to do it for you.
Cables: USB from dongle to PC - CAT5 from dongle to DMX device
-
Oh..I thought it came already programmed. Thought I had read that somewhere, but guess I was wrong. I'll have to do some more reading on how to get that done - LOL. I'll have good Cat5 cable for connecting it to the computer, but will have to find an enclosure. .
Thanks.
From what I've read, PICs are only programmed when supplied as part of the COOP kit - this COOP is not for the whole kit just the PCB so you need to either flash it yourself or check the list in the WIKI for a member to do it for you.
Cables: USB from dongle to PC - CAT5 from dongle to DMX device
Ahh, ok. Well I better look at the wiki then, 'cause I don't have a programmer. Sorry for getting off topic for my learning experience - haha.
-
Please put me in for 6.
Thanks
-
I would like four (4) please
-
Hello,
Please put me down for 4 PCB's.
Thanks!
Ted
-
Thanks RJ,
Please put me down for 2
Thanks
Tom
-
I would like 2 please. Thanks so much!
Christi
-
2 for mahoo
please
-
2 for me please.
RickeyS
-
I would like two please, thanks, Keith
-
I'll take 4!
Thanks a bunch RJ!
-
I am going to add 2 more for a total of 4....thanks
-
i will take 4
thanks
-
RJ,
Please change my order to a total of 4.
Thank You!! <res.
-
4 please.
-
I'll take 4 Dongle pcbs.
Thanks.
-
I will take 2 please
-
4 please. Thanks.
-
I'll take one.
-
Four please
Thanks
-
Hi RJ,
Please put me down for 4 Dongles please.
-Dilip
-
RJ,
Please add 4 for me.
Thanks.
-
Put me in for 1 please.
thanks,
Mike B.
-
Put me down for 2 please. Thanx RJ!
-
RJ,
Put me down for 2 please.
-
I'll take 2 please.
-
Four pcb'slease. Thanks Paul58
-
2 Dongle PCB's for me. Thank you.
-
I will take 3 PCB's please.
FlashG
-
2 for me please
Tom
-
Happy New Year Bill / RJ / family.
Please add me with quantity FOUR.
-
I would like two (2) please.
Thx,
B
-
what the heck, please add to the count by 5 more
-
I will take 2 please
Thanks
-
2 please
-
2 for me please
-
4 for me, if I may.
-
2 for me please..... and thank you.......
-
2 please
Thanks RJ,
John
-
Greetings, 4 please.
Thanks Ray
-
2
Thanks
-
4 dongle PCB's please
Thanks
-
Please put me down for four of these. Thanks Chris.
-
Please put me down for 4
Thank you RJ
-
Hey RJ, put me down for 2 more,4 in total
Thanks, Peter
-
Put me in for 2 please!!
-
2 Please
-
2 for me please
-
Put me down for 3 please
-
I would like 4 please.
Thanks!
-
please up my order from 2 to 4 boards.
thanks, fj
-
I'll take 2 please. Thanks.
-
4 please.
-
I will take 4 please
-
I'll take 4 please. Thanks
-
I'll take 2 please! Thanks!
-
4 Please
-
1 please.
-
RJ: I am a little confused. Is this for the v2 dongle?
-
RJ: I am a little confused. Is this for the v2 dongle?
Yes its the v2 Dongle board
Cheers
Rick R.
-
Rick R.: Thanks for the information. That is what I needed. Have you noticed that this site seems slow tonight? Or is it just my connection?
-
4 please ;D
-
5 dongle PCBs.
Thanks.
-
RJ, please cancel my order.
Thanks,
John
-
I need to add two more for a total of 4. Thanks.
-
I would like 2 please
-
Hopefully this is still open. If so...
10 Boards Please
-
Please put me down for two
-
4 Boards please.
Thanks.
-
4 please
-
Please put me down for 4 boards.
Thanks RJ for doing all this.
-
4 please
-
I was using Firefox when that happened. Have not noticed it again.
-
Please lets keep other topics out of the coops. These are for orders only. There are post on the site about this.
RJ
-
I will take two thank you !
-
I would like two please.
Thanks
-
Please revise my order of 3 to make it a total of 7
-
Please change my order to be 8 boards total please.
RW
-
2 for me please
-
2 for me please.
Thanks jason
-
Please put me in for 4 PCBS thanks!
-
I'm sorry, I need to withdraw my request for 4 if possible. Thank you.
-
I'm sorry, I need to withdraw my request for 4 if possible. Thank you.
No Problem
I removed you from the list
Cheers
Rick R.
-
I would like two (2) please.
Thanks,
Ken Goodwin
-
Put me down for 4.
Thanks
-
Please put me down for 2 PCBs. Thank you!
Patrick
-
I would like 4 please and thanks RJ for running this coop.
Danny
-
Put me in for one please and thanks for running a coop.
-
4 please
-
4 for me please
-
2 Dongle PCBs please.
-
Would you increase mine to 4
orginal order was for 2
Thanks
RickeyS
-
I would like two (2) dongle PCBs.
Thanks,
Ed
-
I will take two please, thanks!
-
4 please
-
Please put me down for 2 PCBs. Thanks.
-
I'll take 2 please.
-
RJ,
Bump me up from 2 to 4 dongle PCB s
Tom
-
I will take 2 of these please
-
+1 board please (2 total)
-
2 PCBs Please
-
Can I get 4
-
I would like 4 boards please.
-
2 please
-
I'd like to change my order from 6 down to 2..
-
Two Please!
-
RJ please cancel my request.
Thank you
Caliente Christmas
Yuri
-
i would like 2 please
-
Can you add 4?
See post #292
-
Two Dongle PCBs for me.
Thanks
-
3 please
Thanks!
-
I would like 4, please
-
RJ,
Would you please add 3 more to my order putting me up to a nice odd 5?
Corey
-
I would like 4 please.
Thanks,
Josh
-
Hey RJ, can you put me down for 2 please.
Thanks
Brad S
-
Alright I gues I'll make the switch put me in for 2 boards.
-
I would like 4 please
-
Hi, I'd like to go for 4 pcs please
-
I would like 2 dongle PCB 's please
-
Two please
Ron
-
Please make me the proud owner of
Three (3) pcb's for the dongle
Thanks
-
4 for me please.
-
I need to drop from 8 down to 6
Sorry
-
RJ,
Please add 2 more to my order putting me up to 4
Thanks
-Jeff
-
RJ,
Please put me down for 4 boards.
Thanks,
-Harold
-
I'd like 2, please.
Thanks,
Dave
-
The coop is now closed for orders. Please verify the amount on the second post is correct. You can not change you amount but if it is incorrect please pm me and let me know. I will get the quote and post the amount per dongle you owe and how to pay tommorrow.
RJ
-
Payment pm's have been sent to all members in the coop. If you have not recieved one then please pm me and let me know.
Thanks.
RJ
-
Please check the list on the second post for being correct. If you have paid and do not show please email me a paypal transaction number so I rectify the issue as the list is current. I will not accept new payments at this time only corrections.
RJ
-
Pcb's have all been ordered.
RJ
-
Just a weekly update :
The PCB's are still on order. I did receive the 500 pack of padded envelopes to ship them in. And the rolls of labels to print the postage on.
RJ
-
PCB's arrived Friday and the whole weekend was spent packaging and labeling.
All coop shipments are on they way to the post office this morning for the coop.
RJ