DiyLightAnimation

Hardware => Lynx Express => Topic started by: tomwb301 on November 29, 2012,

Title: Board Display Is Out
Post by: tomwb301 on November 29, 2012,

Fellow light blinkers,
One of the LE boards doesn't have the display any longer. It did this once before and after a reboot it came back to life. Now nothing. When I push reset and then the select button a few times the 16 green leds chase. Any thoughts?

Tom

Title: Re: Board Display Is Out
Post by: rrowan on November 29, 2012,

Check the little capacitor between the display and large led driver chip

Make sure the insulation on the leds are not blocking the solder joint connection.

Rick R.