DiyLightAnimation

Hardware => Lynx MR16 / 16 CH DC Controller => Topic started by: aususer on December 15, 2009,

Title: PCB Artwork
Post by: aususer on December 15, 2009,

I am pretty keen to get moving on this project (me being a noob with this lighting thing) but can't seem to find any artwork for the board.

I've made a number of double-sided boards before - not too fussed with screenprinting and soldermasking (as I am the one building it - and confident in my soldering skills having professionally breathed in enough flux for many years  :-X )... but just want to get moving in this project.

I can see the screenprint layer and the topside tracks layer in a jpg on the forum... but no bottom side.
anyone?

Or someone in Australia PM me with a price for a prebuilt board pls..

Title: Re: PCB Artwork
Post by: memphislights on December 15, 2009,

You can check the DLA store to see if any boards left.  Otherwise, a COOP will probably start sometime in the late winter/ early spring.

Title: Re: PCB Artwork
Post by: aususer on December 16, 2009,

You are not allowed to view links. Register or Login

You can check the DLA store to see if any boards left.  Otherwise, a COOP will probably start sometime in the late winter/ early spring.

Done already... it appears that this is a busy time of the year  ;)

The artwork just allows me to build them here as I needed..
I take it this is not something that is "freely available" then?

Title: Re: PCB Artwork
Post by: memphislights on December 16, 2009,

You are not allowed to view links. Register or Login

You are not allowed to view links. Register or Login

You can check the DLA store to see if any boards left.  Otherwise, a COOP will probably start sometime in the late winter/ early spring.

Done already... it appears that this is a busy time of the year  ;)

The artwork just allows me to build them here as I needed..
I take it this is not something that is "freely available" then?

No, I believe that RJ prefers not to release schematics or wiring diagrams.

Title: Re: PCB Artwork
Post by: wbuehler on December 16, 2009,

You are not allowed to view links. Register or Login

You are not allowed to view links. Register or Login

You are not allowed to view links. Register or Login

You can check the DLA store to see if any boards left.  Otherwise, a COOP will probably start sometime in the late winter/ early spring.

Done already... it appears that this is a busy time of the year  ;)

The artwork just allows me to build them here as I needed..
I take it this is not something that is "freely available" then?

No, I believe that RJ prefers not to release schematics or wiring diagrams.

This is correct.  PCB's can be obtained in the DLA Store or during a Co-Op

Bill

Title: Re: PCB Artwork
Post by: aususer on December 16, 2009,

Thanks all..
I now fully comprehend the situation.

I'll wait for RJ to advise (or if someone in Aus. who might have one spare)