DiyLightAnimation
Hardware => Lynx Express => Topic started by: fredhag on December 31, 2009,
-
I originally ordered Mouser parts for the just the dongle and my 1st LE board (ver 4). Since several parts were backordered, I decided to update my order for the LE boards I wasn't going to touch 'til the new year. It looks like the Mouser parts list has changed, and I am not sure what's up since I'm a noob. I caught the posts about the 3.3V regulator changing from 595-UA78M33CKCSE3 to 879-UPC2933BHFZ . I saw the troubleshooting problems with the 7805's so I wonder if the change I see on the parts list is the solution (new part is 511-L78S05CV)? The other change seems to be:
581-SA105E104Z -> 581-SA115C104KAR
Am I right on all this?
-
This list is correct for the V4 express pcb's looks like the Mouser link is still off on the 7805 part it should be 511-L7805ABV check your order against the wiki BOM list instead of the one at mouser. I can not change the mouser list since I did not create it so I will get with someone to get it updated. Yes these changes were made for cold temperture operations.
RJ
-
Hi Fred,
Most if not all of the changes were done for colder temperatures.
The 5v reg is now 511-L7805ABV
Hope that helps
Rick R.
oops RJ beat me to the post :)
-
RJ,
that is not my project on mouser, Express v4
Rick R.
-
I have a private copy of the project on Mouser called Express V4 is this the culprit, it is not shared.
-
Opps!!! it was my BOM.. I fixed it so it is good now. :-[
RJ
-
Wow, thanks all! Even on New Year's Eve?
-
Wow, thanks all! Even on New Year's Eve?
HEY!!! Blinky is serious stuff to some of us year round. Nothing, not even holidays get int he way of blinky!! ;D
RJ
-
Was there a problem with the V2/V3 5.0V regulator also? That's a lot of 'V's!
steve
-
Wow, thanks all! Even on New Year's Eve?
HEY!!! Blinky is serious stuff to some of us year round. Nothing, not even holidays get int he way of blinky!! ;D
RJ
Here, Here ;D
-Paul