DiyLightAnimation

Hardware => Lynx Aeon => Topic started by: bwhite505 on April 03, 2011,

Title: My clock works
Post by: bwhite505 on April 03, 2011,

I finished building my clock last night.  Not bad for my first time soldering and assembling.  Only two screw ups.  Switched voltage regulators and one resistor in the hole to be left open.  All fixed and is running fine.  Well almost fine.  I cannot set the minutes it keeps jumping to 30 no matter what. Oh well waited until 11:30 set it and off and running.  Not bad for a newb if I don't say so myself.  Next up 6 Express kits.....

Brian

Title: Re: My clock works
Post by: SteveMaris on April 03, 2011,

Good job! Great fun, isn't it?

Title: Re: My clock works
Post by: batdive on April 03, 2011,

Congrats and good job


-JS

Title: Re: My clock works
Post by: smartcontrols on April 03, 2011,

Congratulations!!!

You can set it any time after 10 minutes after the hour.

Title: Re: My clock works
Post by: lineman on April 03, 2011,

congatulations on your first of many successes

Title: Re: My clock works
Post by: RJ on April 03, 2011,

You are not allowed to view links. Register or Login

Congratulations!!!

You can set it any time after 10 minutes after the hour.

Congrats!!!

Was not aware there was a bug doing this.

I will have to look into that.

RJ

Title: Re: My clock works
Post by: LondoB5 on April 03, 2011,

You are not allowed to view links. Register or Login

You are not allowed to view links. Register or Login

Congratulations!!!

You can set it any time after 10 minutes after the hour.

Congrats!!!

Was not aware there was a bug doing this.

I will have to look into that.

RJ

It's not really a bug. I had the same issue when I built my clock this weekend. After reflashing the Pic, everything worked 100%

Title: Re: My clock works
Post by: bwhite505 on April 03, 2011,

I will try re-flashing the pic when I get my PicKit.

Brian

Title: Re: My clock works
Post by: tonyv2842 on April 05, 2011,

I had the same problem with the minutes starting at 30 initially as well.  If I remember right, pressing set a couple of times started the minutes moving and I was able to set it.  Since I've been seeing other people talking about the same problem, I got setup to make a video of the problem.  Now though, it works just fine when I go to set it.  I didn't realize it was all good after 10 past the hour.  Good find!

Title: Re: My clock works
Post by: tonyv2842 on April 05, 2011,

You are not allowed to view links. Register or Login

Congratulations!!!

You can set it any time after 10 minutes after the hour.

Yep, just confirmed it, if I set the time to anywhere from 00 to 10 past the hour and hit select, the minutes jump to :30.  Setting the minutes to any other time works just fine.
Did I mention that was a really great find???  <res.

Title: Re: My clock works
Post by: LondoB5 on April 06, 2011,

Try reflashing your pic and that will go away.

Title: Re: My clock works
Post by: tonyv2842 on April 06, 2011,

I will try reflashing the PIC.  Thanks!