Good evening and Merry early Christmas!
I have a couple of MR16's I built during the summer. I am having issues with them both as they both seem to have channels that are not working. I measured the voltage to each lug and in one, 2 of the 16 are not working and the other, 4 of 16 are out. I checked for burned areas, checked for cold solder joints, etc. but nothing jumps out and slaps me in the face. On one, a couple for the channels are intermittent.
I am driving these with the usb dongle in DMX mdoe using xLights. Distance from the computer is less than 15'. I have done this with only the MR16's on the line and nothing else. Only driving dumb RGB's at this point (6) of the rectangle from Holiday Coro on each channel.
Ideas?
Thanks in advance,