I'm struggling with outputs from 1 hub within my display. Receives some signals, but generally not responsive. Everything was working well until we had an ice storm come through. No water in the boxes, and the smart string pipes were dry for the elements attached.
My display:
Hub 1 & 2 - Runs mega tree
Hub 3 - runs windows and arches
Hub 4 - runs dumb strings
Cat 5 runs Etherdongle--> Hub 1 --> Hub 2 --> Hub 3 --> Hub 4
Hub 3 is the one giving me problems. Note: Hub 4 seems to run without problems
Checked the cat 5 from Hub 2 - Hub 3 - good connection, but ran a new cable just in case - no change.
Swapped Hub 3 with Hub 4 (thinking there was something wrong with the hub) - no change
Swapped Hub 2 with Hub 4 (thinking that maybe the output connection might be bad) - no change
I'm running the same load as on Hub 1& 2, with the same power supplies (so shouldn't be overloaded)
I'm using the LSP scheduler to output lights.
I'm running out of ideas of what to check. Any thoughts?