DiyLightAnimation
Hardware => Lynx Splitter => Topic started by: christmas_in_VA on August 15, 2008,
-
Parts list question.
RJ, I was looking at the BOM for the splitter and it said there were 3 parts that said you get from digikey. Mouser has the parts. Is it on there for cost?
Ben
-
What is the part number for the fuse and fuse holder. It is missing from the parts list BOM.
Is the AC in connector the same as Eurostyle Terminal Blocks 5.0MM ECONOMY 2P 14-24AWG Mouser part 538-39890-0302. It looks like it on one of the pictures. It is missing from the parts list BOM.
There is also a 7805 Voltage Regulator part number missing as well.
Unfortunately I didn't QC the part's BOM close enough before ordering. Time for another Mouser order. ;D
MC2K
-
I'm about to make my Mouser order for the Splitter as well as the Dongle... I guess the BOM needs updating? I also saw a 115V Transformer on the BOM. Am I safe in assuming (and you know what happens when you assume) that I need to change this for 220V operation?
-
I'm about to make my Mouser order for the Splitter as well as the Dongle... I guess the BOM needs updating? I also saw a 115V Transformer on the BOM. Am I safe in assuming (and you know what happens when you assume) that I need to change this for 220V operation?
John:
That is a Digi-Key part and it is only for 115v; it looks to me from the catalog that what you want is Digi-Key part No. 567-1019-ND.
But, I could be wrong ;)
\dmc
-
Parts list question.
RJ, I was looking at the BOM for the splitter and it said there were 3 parts that said you get from digikey. Mouser has the parts. Is it on there for cost?
Ben
Just saw this when it got bump by the addional posts. No I missed that mouser had them most likely.
RJ
-
What is the part number for the fuse and fuse holder. It is missing from the parts list BOM.
Is the AC in connector the same as Eurostyle Terminal Blocks 5.0MM ECONOMY 2P 14-24AWG Mouser part 538-39890-0302. It looks like it on one of the pictures. It is missing from the parts list BOM.
There is also a 7805 Voltage Regulator part number missing as well.
Unfortunately I didn't QC the part's BOM close enough before ordering. Time for another Mouser order. ;D
MC2K
Same connector as the one on the SSR4.
I have updated the BOM.
RJ
-
RJ, thanks for updating the Splitter BOM.
Are there fuse/fuse holder parts numbers? I may not know what I'm looking at but I don't see them there.
Are there equivalent Mouser part numbers for the two Digikey items? I'd rather not have to make orders from two different vendors.
-
RJ, thanks for updating the Splitter BOM.
Are there fuse/fuse holder parts numbers? I may not know what I'm looking at but I don't see them there.
Are there equivalent Mouser part numbers for the two Digikey items? I'd rather not have to make orders from two different vendors.
Ok missed them also give me a few minutes they are the same as the SSR4
RJ
-
Fuse and holders have been added to the BOM.
RJ
-
Hi Folks,
Just wanted everyone to know that the part number for Digikey Transformers are missing a dash
the BOM shows 567-1013ND while the correct number is 567-1013-ND
same for the 230 volt version
567-1019-ND should be 567-1019-ND
-
I also noticed that the ssr4 BOM was missing the part number for the '2 pin terminal block' I assume it's the same as the SSROZ 2 pin terminal block.
MC2K
-
I also noticed that the ssr4 BOM was missing the part number for the '2 pin terminal block' I assume it's the same as the SSROZ 2 pin terminal block.
MC2K
Strange in the updated BOM there is a 2 pin terminal block 651-1935310
Unless there is something different?
Rick R.
-
I also noticed that the ssr4 BOM was missing the part number for the '2 pin terminal block' I assume it's the same as the SSROZ 2 pin terminal block.
MC2K
Strange in the updated BOM there is a 2 pin terminal block 651-1935310
Unless there is something different?
Rick R.
Guys, I think this is the wrong number. Just assembled my splitter and the screws on this part face the wrong direction. (SIDE) 651-1935310 Two position terminal block for power
This one for the Freestyle should work better. RJ, If you read and concur could you change the BOM?
651-1935161 PCB Terminal Blocks PT 1.5/2-5.0-H 1
-
Above post edited to add request.
-
I also noticed that the ssr4 BOM was missing the part number for the '2 pin terminal block' I assume it's the same as the SSROZ 2 pin terminal block.
MC2K
Strange in the updated BOM there is a 2 pin terminal block 651-1935310
Unless there is something different?
Rick R.
Guys, I think this is the wrong number. Just assembled my splitter and the screws on this part face the wrong direction. (SIDE) 651-1935310 Two position terminal block for power
This one for the Freestyle should work better. RJ, If you read and concur could you change the BOM?
651-1935161 PCB Terminal Blocks PT 1.5/2-5.0-H 1
651-1935310 is the correct part number for this. It has been used on all of mine and the SSR4 coops also. It is suppost to be with the screw on the side and wire in the top.
Not saying your not able to use the other but this is the intended part.
RJ
-
651-1935310 is the correct part number for this. It has been used on all of mine and the SSR4 coops also. It is suppost to be with the screw on the side and wire in the top.
Not saying your not able to use the other but this is the intended part.
RJ
Thats good to know RJ. I thought mine was one of a kind. I was just goin by the pic you posted here.
http://diylightanimation.com/index.php?topic=342.msg4061#msg4061
Thanks
Leon
-
OK, one more substitution question.
Mouser is out of the 1A DF005M for a few weeks.
They do have the 1.5A DF15005M rectifier. Since this unit doesn't take much power, I'm assuming that the slightly higher rated rectifier will work. It is the same form factor, so it should fit in the 6 pin socket.
Thanks,
-
OK, one more substitution question.
Mouser is out of the 1A DF005M for a few weeks.
They do have the 1.5A DF15005M rectifier. Since this unit doesn't take much power, I'm assuming that the slightly higher rated rectifier will work. It is the same form factor, so it should fit in the 6 pin socket.
Thanks,
Use these mouser pn# 512-DF005M there are thousands and they are the same part just rebranded.
RJ
-
Well, if I had found that part number, I would have ordered it. But I went ahead with the 1.5 A rectifier and placed an order this afternoon. Mouser shipped it tonight, and I should have it in a few days...
I guess I could have waited, since the PCB's won't be here for awhile, but I didn't...