-
This coop is now closed.
Greetings Fellow DLA Members,
This is a Coop for the Lynx USB DMX Dongle Version 1 & Version 2 Cases.
Please read this post completely before participating in this Coop.
The instruction manual, BOM, and other information about the Lynx USB DMX Dongle may be found in the wiki at the following link. http://diylightanimation.com/wiki/index.php?title=Equipment#DMX_Devices
This is a CASE ONLY coop for the Lynx USB DMX Dongle v1.0 and v2.0 cases. No other parts or PCBs are included in this coop. These are the correct cases as specified in the BOMs with CNC machined openings for the USB connector and the RJ-45 connector on both the v1.0 and v2.0 cases. The v2.0 cases will have the holes for the two status LEDs on the v2.0 PCB. The cases will also include the screws to attach the Dongle PCB inside the case.
By participating in this Coop you agree that the Coop manager and DLA (as a board and to also include all administrators, moderators, and members) shall not be held responsible for any liability. You are joining this Coop at your own risk.
As in any Coop, this Coop is subject to the Forum Coop Rules. These rules can be reviewed using the following link. http://diylightanimation.com/index.php?topic=111.0
This Coop will close at 8:00 P.M. PDT Wednesday, September 15, 2010.
Once the Coop is closed I will send each member a PM confirming the details of their order and the payment amount that is due. Full payment is expected when the coop is closed since the order cannot be placed until all members have paid. Please submit your PayPal payments as soon as you get the Coop invoice PM. Please insure your PayPal address info is up to date.
According to the vendor, the current lead time for the cases is 4 weeks from the time the order is placed. If all payments come in promptly, I would hope to place the order no later than the 20th of September. This would, in theory, get the cases out to the members towards the end of October.
Shipping will be by US Postal Service Flat Rate boxes. Flat Rate box size and cost will be determined by the number of cases ordered and will be sent out on a separate shipping invoice PM.
Here are the pricing breakdown details based on the initial quotes from the vendor. Pricing is in US Dollars and includes PayPal and Coop fees.
Kit 1 – Lynx USB DMX Dongle Version 1 Case - UPDATED 9-13-10 - Received quote for QTY 25 from vendor.
Per Case at Qty 10 - $11.25
Per Case at Qty 25 – $7.00
Per Case at Qty 50 - $6.00
Per Case at Qty 100 - $5.15
Kit 2 –Lynx USB DMX Dongle Version 2 Case
Per Case at Qty 25 - $9.75
Per Case at Qty 50 - $7.00
Per Case at Qty 100 - $5.75
As always higher numbers reduce pricing and lower numbers increase pricing. You can update or change your order during the ordering portion of the Coop. Please make sure that number of cases listed for you in the 2nd post in this Coop thread is the number you want to order.
Please post in this thread, the quantity of v1.0 and/or v2.0 cases you wish to order. Thanks
FINAL PRICING UPDATE 9-16-10
Version 1 case $10.75 including PayPal and Coop fees.
Version 2 case $ 5.75 including PayPal and Coop fees.
Alan T
-
Member | Kit 1 - v1.0 Case | Kit 2 - v2.0 Case | Paid | Shipping Paid |
RJ | 1 | 3 | Yes | Yes |
D56VillageNut | 2 | 2 | Yes | Yes |
johno123 | -- | 1 | Yes | Yes |
Kwajtony | 2 | 2 | Yes | Yes |
Night Owl | -- | 2 | Yes | Yes |
rdebolt | -- | 2 | Yes | Yes |
joshuashu | 1 | -- | Yes | Yes |
dowdybrown | 1 | 4 | Yes | Yes |
Freebird | -- | 1 | Yes | Yes |
dmoore | -- | 2 | Yes | Yes |
paul58 | -- | 2 | Yes | Yes |
jnealand | -- | 2 | Yes | Yes |
lineman | -- | 3 | Yes | Yes |
egenoup | 1 | 2 | Yes | Yes |
pawpawlights | -- | 2 | Yes | Yes |
trekster | -- | 2 | Yes | Yes |
coachers | -- | 2 | Yes | Yes |
jandelee | -- | 2 | Yes | Yes |
meman | 1 | 2 | Yes | Yes |
castortiu | -- | 2 | Yes | Yes |
tennhillbilly | -- | 2 | Yes | Yes |
ldkennell | -- | 2 | Yes | Yes |
kj77rn | 1 | 2 | Yes | Yes |
StanB | -- | 2 | Yes | Yes |
Mickpat | -- | 1 | Yes | Yes |
CW | -- | 1 | Yes | Yes |
CJ | -- | 4 | Yes | Yes |
batdive | -- | 2 | Yes | Yes |
goyousalukis | -- | 1 | Yes | Yes |
tbone321 | -- | 1 | Yes | Yes |
FlashG | -- | 2 | Yes | Yes |
Hod | -- | 2 | Yes | Yes |
bcwhitehead | -- | 2 | Yes | Yes |
cardoc13 | -- | 2 | Yes | Yes |
Arvin | -- | 1 | Yes | Yes |
jerrymac | -- | 2 | Yes | Yes |
BryanV | -- | 2 | Yes | Yes |
kfxi | -- | 1 | Yes | Yes |
solimodeler | -- | 2 | Yes | Yes |
David Campbell | -- | 2 | Yes | Yes |
ronniek | 2 | 2 | Yes | Yes |
pircy | -- | 2 | Yes | Yes |
klaasb01 | -- | 4 | Yes | Yes |
Rbar | -- | 2 | Yes | Yes |
chrisl1976 | -- | 1 | Yes | Yes |
garyh | -- | 2 | Yes | Yes |
BigGunFish | -- | 4 | Yes | Yes |
RDwizard | -- | 4 | Yes | Yes |
Rod R | -- | 1 | Yes | Yes |
supergumby | -- | 1 | Yes | Yes |
sirwesley | -- | 1 | Yes | Yes |
Caliente Christmas | -- | 3 | Yes | Yes |
pete peters | -- | 3 | Yes | Yes |
Christmasaddict | -- | 2 | Yes | Yes |
wbuehler | -- | 6 | Yes | Yes |
lortiz | -- | 2 | Yes | Yes |
CaptainBli | -- | 1 | Yes | Yes |
comporder1 | -- | 1 | Yes | Yes |
-
I'll take one kit #2
Thanks!
-
Thanks for stepping up. I would like 1 Kit #1 and 1 Kit #2. Thanks.
Tony "C"
-
Two kit #2 cases for me please!
-
2 quantity of kit # 2 please!
Thanks,
Roger
-
HI,
I will take 1 of kit #1. thanks so much for doing this.
-
I'll take 1 of Kit #1 and 2 of Kit #2. Thank you so much!
Matt
-
Oh what the hey..... I will take 1 of Kit #2. Thanks
Freebird.
-
I need 2 of version 2 please.
Thanks, Paul.
-
I would like to have two ver 2 cases. thanks
-
I would like 3 of kit 2 dongle case v2
-
I'll take the following:
One of Kit #1
Two of Kit #2
Thanks,
Charles
-
Put me in for 3 Kit # 1
-
Thank you for taking this on Alan we all appreciate it. <wd..
I need two of the V2 cases.
Matt
-
Put me down for one KIT #2
Thank You
Ron
-
Please put me down for Two of kit # 2
-
Thanks for doing this
2 of #2 plz.
-
Perfect timing on this coop, thanks Alan!
1 - Kit #1
2 - Kit #2
Thanks Again,
Mike E.
-
Put me down for 2 - Kit #2
Thanks,
Cas
-
2 of kit #2 Please Thanks!!
-
I will take 2 - Kit #2 (V2.0) cases
Thanks,
LK
<res.
-
The following for me.
Thanks
Kit 1 - 1
Kit 2 - 2
-
I would like one Kit #2.
Thanks,
Stan
-
1 Qty of Kit #2. Thank you.
-
Hi Alan,
Please put me down for 1 of kit #2.
Thanks,
Craig
-
Hi, Alan
Please add me to your coop I would like to get ( 4 ) of V-2.0 case.
Thanks,C J
-
I'll take 1 of #1 and 1 of #2
-
Put me in for one ver 2 case.
-
Please put me in for 1 Kit #2
-
Alan can you change my order to 0 of Kit #1 and 2 of Kit #2 ...
Thanks
-
Alan can you change my order to 0 of Kit #1 and 2 of Kit #2 ...
Thanks
Consider it done
Alan T
-
Put me down for 2 of the version 2.
FlashG
-
Please put me down for 2 of the version 2 cases.
Thank you very much for putting this together.
Hod
-
Alan,
Please put me in for 2 of kit #2.
Thanks
Brandon
-
Alan
can you put me down for 2 kits for ver#2
-
I'll take one of the version #2, thanks.
Arvin
-
Please add me for (2) each of Version 2
-
I'll take 2 version # 2 cases.
Thanks
-
PLEASE PUT ME DOWN FOR ONE VERSION 2 CASE
KEN
KFXI
-
2 - #2 cases for me please.
-
Sign me up for 2 - #2 cases
-
Two Kit #1
Two Kit # 2
Thanks,
Ronniek
-
1 x kit 2 for me plz
-
4 of Kit #2
Please
-
2 of Kit #2
Rbar
-
ONE of kit #2 please
Thanks
Chris
-
Looks like kit two will have enough sales to drop the price to $5 range.
I am sorry but please change my order to a total of two (2) kit 2 cases please.`
Thank You
Ron
-
Two kit #2 cases for me please!
Thanks for the coop!
-
Please put me down for 4 kits-#2
Thanks,
Stephen
-
Looks like kit two will have enough sales to drop the price to $5 range.
I am sorry but please change my order to a total of two (2) kit 2 cases please.`
Thank You
Ron
Don't be sorry. The more the merrier. Order has been updated.
Thanks
Alan T
-
Please put me down for 4-Kit#2.
Thanks
RDWizard
-
Please put me down for 1 of Kit#2
Thanks
-
I'll take
1 Kit #2
/Don
-
1 x kit #2
Thanx!
-
Hi please order me 3 of Kit 2 - v2.0 Case
Thanks
<md.. Caliente Christmas <md..
-
Update:
I contacted Polycase this morning to get a price break at Qty 25 for the Version 1 case which I had not been given on my original request. They said they can certainly do that and will be getting that out to me. I will update the first post when I get the information.
Alan T
-
Please put me down for
(3) Three Version 2 (TWO) Kits
Thanks
Pete
-
I'll take 2 of the version 2 case please.
Paul
-
Question? is there much difference in the case besides the LEDS from version 1 to 2? i am just thinking since mine does not go outside i could just get a version 2 if the mounting holes are the same? does not seem to be much interest in the version 1 case?
-
Question? is there much difference in the case besides the LEDS from version 1 to 2? i am just thinking since mine does not go outside i could just get a version 2 if the mounting holes are the same? does not seem to be much interest in the version 1 case?
According to RJ, there is a slight change in the spacing and location of the USB and Cat5 connectors on the v2 pcb. Plus, as you noted, the two holes for the LEDs. I have asked the vendor for an update to get a price for a quantity of 25 for the Version 1 case which should drop the price down to around the same as the 25 qty break for the version 2 if not a little less.
My personal opinion is that the proper case makes the project look awesome. You could try to make a v1 pcb fit a v2 case and vice versa but if you can hold out a bit for the pricing update on the v1 at 25 units you may find the cost is reasonable. I agree that the interest level on the v1 case is low but I offered it as I know there are still a few v1 pcbs out there waiting to be built.
In the end it's your call but that's why I set this coop up to offer both. If you can hold off on a decision I should have the updated pricing on Monday.
Thanks for asking though.
Alan T
-
Can I get Qty 6 of Kit #2
Thanks
Bill
-
Question? is there much difference in the case besides the LEDS from version 1 to 2? i am just thinking since mine does not go outside i could just get a version 2 if the mounting holes are the same? does not seem to be much interest in the version 1 case?
According to RJ, there is a slight change in the spacing and location of the USB and Cat5 connectors on the v2 pcb. Plus, as you noted, the two holes for the LEDs. I have asked the vendor for an update to get a price for a quantity of 25 for the Version 1 case which should drop the price down to around the same as the 25 qty break for the version 2 if not a little less.
My personal opinion is that the proper case makes the project look awesome. You could try to make a v1 pcb fit a v2 case and vice versa but if you can hold out a bit for the pricing update on the v1 at 25 units you may find the cost is reasonable. I agree that the interest level on the v1 case is low but I offered it as I know there are still a few v1 pcbs out there waiting to be built.
In the end it's your call but that's why I set this coop up to offer both. If you can hold off on a decision I should have the updated pricing on Monday.
Thanks for asking though.
Alan T
No problem thanks for answering, i can wait. no need to change.
-
Update my request to 2 each. Thanks.
-
Update my request to 2 each. Thanks.
Updated per your request. Thanks
Alan T.
-
Please update me to 2 of kit #2. Thanks.
-
Please update me to 2 of kit #2. Thanks.
Updated as requested. Thanks
Alan T.
-
Please delete my requirement for this coop. I thought I had gotten some of these before and I stumbled across them today.
-
I'll take 1 of Kit #1 and 2 of Kit #2. Thank you so much!
Matt
Sorry, but I need to increase my order to:
1 of Kit #1 and 4 of Kit #2. Thank you again!
-
Please delete my requirement for this coop. I thought I had gotten some of these before and I stumbled across them today.
Glad to hear you found yours. I'll cancel the ones in the coop.
Alan T
-
I'll take 1 of Kit #1 and 2 of Kit #2. Thank you so much!
Matt
Sorry, but I need to increase my order to:
1 of Kit #1 and 4 of Kit #2. Thank you again!
Order updated. Thanks
Alan T
-
Please add me for :
Kit #2 - Qty 2
Thanks,
Leo
-
Received pricing from the vendor for qty of 25 on the Version 1 case.
Updated first post with info. With all fees the unit cost at 25 would be $7.00 plus shipping.
If you need or think you might need a Veresion 1 case here's your chance.
Thanks
Alan T
-
This coop is winding down. Just over 26 hours to go.
We've passed the 100 unit mark on the Version 2 cases.
The vendor sent me updated pricing to give us a break at an order quantity of 25 on the Version 1 cases.
If you need, might need, or know of anyone that might need a Version 1 case, this is a great time to get one.
I can't say for certain, but based on the response in this coop, the odds of putting together another order big enough to get decent pricing on the customized Version 1 cases are slim.
Version 2 is now the current "standard" as it were.
Please take a moment to double check the 2nd post to ensure I have your order listed correctly. Once the coop closes I'll get the final pricing together and send the Payment PM's out by the end of the week.
I want to say "Thanks" to everyone that's put an order in so far.
Alan T
-
Hello,
I need 1 version #2 case.
Thank you.
-
Can you please update my order to 2 X version 2 case
Thanks
-
Can you please update my order to 2 X version 2 case
Thanks
Updated. Thanks
Alan T
-
Put me in for qty-1 of the Ver2.
Thanks
Carey
-
Dongle Case Coop is now CLOSED.
Alan T
-
Payment PMs have been sent.
Seperate shipping PMs will be sent when the cases are received here and ready to ship out.
Confirmed that the vendor has received the sample v2 dongle I sent for fit check of the v2 cases.
Polycase has a 4 week lead time from the time the order is placed.
I would like to get this order placed early next week so prompt payment would be greatly appreciated.
Thank you.
Alan T
-
Great job on getting payments sent. I have 46 payments received as of Sat morning. I count 12 payments left to be made and then the order can be placed. Please double check and if I've not put YES in the paid column for you but you've sent payment please PM me.
Thanks
Alan T
-
A couple more payments received. 10 still left to pay.
Thanks
Alan T
-
8 payments left to be received before this order can be placed. If you've sent your payment and I've not marked YES in the Paid column for you please send me a PM.
Thank you.
Alan T
-
A couple more payments received. I show 6 orders waiting for payment.
Thanks
Alan T
-
Now down to
4 3 left to pay.
Alan T
-
We're down to
4 3 left to pay. Please check the 2nd post in the thread.
Thanks.
Alan T
-
ONLY ONE PAYMENT LEFT TO GO THEN ORDER CAN BE PLACED.
Alan T
-
ALL PAYMENTS ARE IN. THANK YOU EVERYONE.
I will be placing the order tomorrow.
Alan T
-
YEA!!! 8)
Ron
-
Case order has been placed. Now the wait. Vendor advised that it was approx 4 weeks from time the order was placed until cases are ready and shipped out.
I'll do my best to keep you posted even if it's to say "Nothing New at this time"
Thanks for the great participation on this coop. I'll send the Shipping PMs when I receive the cases.
Alan T
-
Received confirmation from vendor that order has been entered and they estimate the cases should be ready to ship to me on 10/21/2010.
Alan T
-
Just posting to comply with Coop Rules. No change in order status. Did receive the Flat Rate Boxes for shipping the cases out so those are taken care of. More later.
Alan T
-
Received an e-mail from the vendor with version 2 case drawing to verify the customization request. Confirmed that the drawing matched my request. Vendor stated they will begin set-up and confirm that the sample v2 dongle I sent fits the v2 case. Still anticipate a 10/21 date for shipping from the vendor.
That's it for now.
Alan T
-
Just a status check. Vendor is still telling me that they expect to ship on Oct 21st.
Alan T
-
Update.
Cases are not finished so expected ship date of 10-21-10 has slid. I will follow up on Monday to see when they expect to finish them and get them headed my way. I'll update when I have more information.
Thank you.
Alan T
-
Thanks for the updates
-
Yes, thank you. It is appreciated for sure.
Ron
-
Well, I'm not in much of a hurry since parts are so hard to come by for the V2 dongle all I have is two pcbs. I still have my V1 dongle and it is working just fine.
-
Update:
I Spoke to Polycase this morning and the Dongle cases did ship on 10/21.
The tracking information didn't make it to my e-mail. (Hmmmmm)
The good news is they should arrive here on Thursday 10/28.
I will get the shipping PMs out this week.
Have a great week.
Alan T
-
Good news. ;D
The UPS man delivered the cases this afternoon.
Shipping PMs have been sent out.
I will send the cases out as quickly as I can when shipping payments are received.
Please make sure to include your DLA Username in the NOTES section.
Thank you,
Alan T
-
UPDATE:
Received the sample v2 Dongle back from vendor in a seperate package so just now got a chance to mount it and check the fit.
Polycase did a great job. (I didn't get the the green LED mounted as good as I did the red one on the sample so it's not as neat as I know you all will do :) so any irregularities you see in the photos are mine not the vendors. ;D)
I have a load of boxes ready to go the PO this afternoon and will get the rest out as quick as I can when shipping payments come in.
Thanks again for the great participation by the DLA community.
Alan T
-
Looks great, Guess I better get home send money to paypal and pay you huh! <fp.
RJ
-
Looks great, Guess I better get home send money to paypal and pay you huh! <fp.
RJ
No rush on this end. Enjoy the rest of your trip and have a safe return home.
Alan T
-
SHIPPING PMs HAVE BEEN SENT
I've updated the 2nd post in this thread to show the payments I have received for shipping. Currently I have 13 12 people that need to send payment so I can ship you your Dongle Cases.
If I do not have you marked as "SHIPPING PAID" but you have, please send me a PM so we can track it down.
Thanks for the prompt response from those who have paid. I sent out 38 packages on Friday.
Have a Happy Halloween tonight and a here's to a great week to kick off November.
Alan T
-
Alan, Got my package today. Thanks.
Freebird
-
Alan, Got my package today. Thanks.
Freebird
Did you get the rain I sent with it? ;D
AT
-
Got my package today. Thank you.
Ron
They look great!
-
Alan, Got my package today. Thanks.
Freebird
Did you get the rain I sent with it? ;D
AT
LOTS OF IT!!! take it back to the wet side!!!
:o
-
Got Mine Today Thanks SOOOO Much
-
Got mine today as well. Now I can use it to make a template to modify one of my ver 1 cases for my second ver 2 board.
-
Glad to hear the Postal Service is getting these delivered.
Alan T
-
Got mine also, thank you and appreciate it.
-JS
-
Got mine today!
Umm, I forgot to mount the lights sideways..DUH!
I have peep holes!
Thanks for doing this,
AL
-
Received box today. Thank you for doing this.
-
Umm, I forgot to mount the lights sideways..DUH!
I have peep holes!
<la..
OK, Now I don't feel so bad. I did the same thing! <fp. Fortunately I only built 1 so I can do my next one correctly! ::)
Thanks for running this COOP Alan! I Received mine yesterday.
-
You're Welcome to everyone.
I still have 10 or 11 members that need to submit the shipping payment so I can get their cases on the way to them.
They are boxed and ready to go.
Please remember to check "Goods" and include your DLA Member name when sending the PayPal so I receive your correct "Ship To" information and can print a shipping label from PayPal.
Thanks again for the great participation from the DLA community.
Alan T
-
Got my box of goodies today... Thanks for all of the hard work.
Egenoup
-
Got my box today and got all of the boards mounted in them tonight. Thank you so much, Alan!
Matt Brown
-
Got my cases, got my pcbs, now to wait for parts to come back into stock. Fortunately my V1 dongle works just fine.
-
Alan, so sorry in the payment delay. Thanks again for doing the coop.
Rod
-
Woo Hoo I get a box at my door! Thanks for doing this Alan. <res.
-
My box arrived last week and looks great.
Thanks for doing this.
Bill
-
UPDATE:
I have four dongle case orders waiting for shipping payments.
I have updated the 2nd post in this thread with the list of who's sent me their shipping payment.
If you are shown as not paid for shipping but you did submit payment please send me a PM so I can track it down.
If you've not sent the shipping payment, please consider this just a friendly reminder. :)
I'd like to get these out to their rightful owners in the next day or so.
Thank you.
Alan T
-
Thanks Alan for taking on this Coop. I received mine and they look great.
Thanks Again,
Stephen
-
All cases have shipped.
No issues reported from the membership at large so we can consider this coop ..... wait for it.....
FINISHED!!!
Thank you everyone for the great participation.
My wife and I hope you all have a wonderful Thanksgiving and of course we wish you all a very MERRY CHRISTMAS.
Alan T.
-
It looks like this coop has wrapped up and I've not heard anyone say that they are missing cases or got the wrong ones, etc. Could one of the administrators move this to the Finished section and we can truly say that this one is "FINISHED"
Thanks,
Alan T