DiyLightAnimation

Hardware => Lynx Express => Topic started by: Sloanhaus on June 22, 2009,

Title: 2 expresses in 1 enclosure
Post by: Sloanhaus on June 22, 2009,

I am setting up an arch that will need 2 expresses in the same location. I have decided to use one enclosure for this. I will be using all leds so I dont think heat will be an issue. I used #8 screw 1/2 inch. The screw penetrated a tiny bit, I plan on just coating the screw with a little silicone sealer. I cant post pictures for some reason so I will get someone else to post the picture.

Brad

Title: Re: 2 expresses in 1 enclosure
Post by: grossg on July 06, 2009,

Smart!  I would be interested in the pics!

Best regards,
Glen