DiyLightAnimation

Hardware => Lynx EtherDongle => Lynx Conductor => Topic started by: chrisatpsu on December 04, 2012,

Title: trigger board...
Post by: chrisatpsu on December 04, 2012,

I assume the black part of the diode is the orientation for the mark on the symbol on the pcb?

Title: Re: trigger board...
Post by: n1ist on December 04, 2012,

The black stripe or band is the cathode.
 (http://www.diylightanimation.com/wiki/images/b/bc/Trigger2.jpg)
Here's the  picture from the wiki.
/mike