I have a working dongle (verified working and sending data to LE that belongs to Jim Nealand). I am now trying to send data to my 2 LEs I just built and I am not getting anything. The LEs test sequences were good.
I installed the driver from FTDI, version 2.8.24.0 dated 4/10/2012.
Port is com25
bits/sec is 115200
data bits 8
parity none
I followed Bill's instructions in his video for setting up the dongle, created a sequence, assigned enttec DMX pro plug-in, tested channels and saw the green light on the dongle flickering/changing intensity.
I am connected from the dongle to the "dmx in" on the LE (either one, I tried both one after another, I did not try them connected together). I tried with the "terminate" jumper on and off.
I tried 3 different cat 5 cables. Starting channel on the LE is one and my test sequence starts at channel 1. I am not getting data to the LE.
Any idea what I might me missing? Thanks in advance for your suggestions.