DiyLightAnimation
Hardware => Lynx SSR4 => Topic started by: trekster on March 08, 2011,
-
The back ordered resistors for the ssr4's. I found what looks the same on ebay. Is this the equivalent part to replace the back ordered ones from Mouser?
Not bad price....$3.25 for 20 of them.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3856403767
Ron
-
This may work but it is only listed as .2 watt, the mouser link for the SSR4http://www.mouser.com/Search/ProductDetail.aspx?R=4608X-102-681LFvirtualkey65210000virtualkey652-4608X-2LF-680 (http://www.mouser.com/Search/ProductDetail.aspx?R=4608X-102-681LFvirtualkey65210000virtualkey652-4608X-2LF-680) is 1 watt.
-
due to the back order issue with Mouser I bought mine from Digi Key
-
I ordered this from Newark.
http://www.newark.com/jsp/search/productdetail.jsp?SKU=32K9049 (http://www.newark.com/jsp/search/productdetail.jsp?SKU=32K9049)
same electrical specs, just a different package (black box - like an IC on end, as opposed to the tan bubble look)
about 48 cents each
EDIT: but now i see they dont have those in stock either : (
EDIT AGAIN: but mouser has the part (http://www.mouser.com/ProductDetail/Bourns/4308R-102-681LF/?qs=sGAEpiMZZMvrmc6UYKmaNVyrP4i3pNjKCKaxYNOybKs%3d (http://www.mouser.com/ProductDetail/Bourns/4308R-102-681LF/?qs=sGAEpiMZZMvrmc6UYKmaNVyrP4i3pNjKCKaxYNOybKs%3d))
Mouser lists it as a 68 ohm resister network, but that's a typo... it is deffinately a 680 ohm resistor network.
4308R-102-681LF
43= Molded SIP
08= Number of pins
R= Thick Film
102=Isolated
681= first two numbers is the value, third digit is how many 0's to follow, in this case 1, so value is 680 ohm
LF = Tin Plated
-
here is the one I bought
http://search.digikey.com/scripts/DkSearch/dksus.dll?WT.z_header=search_go&lang=en&site=us&keywords=4308r-2-684lf-nd&x=0&y=0
Mouser has it too both at .54 each
http://www.mouser.com/ProductDetail/Bourns/4308R-102-684LF/?qs=3U1hhDIovyFX6fCF%252bAn9KA%3d%3d
-
on further review they may work, here is the link to the specified resistor network http://www.bourns.com/data/global/pdfs/4600x.pdf (http://www.bourns.com/data/global/pdfs/4600x.pdf)
I bought out my local HSC at 10 Cents each
Good luck :)
-
here is the one I bought
http://search.digikey.com/scripts/DkSearch/dksus.dll?WT.z_header=search_go&lang=en&site=us&keywords=4308r-2-684lf-nd&x=0&y=0
Mouser has it too both at .54 each
http://www.mouser.com/ProductDetail/Bourns/4308R-102-684LF/?qs=3U1hhDIovyFX6fCF%252bAn9KA%3d%3d
DONT USE THAT ONE
it's 680K = 680,000 ohms, not 680 ohms
-
thanks for pointing that out! <fp.
-
on further review they may work, here is the link to the specified resistor network http://www.bourns.com/data/global/pdfs/4600x.pdf (http://www.bourns.com/data/global/pdfs/4600x.pdf)
I bought out my local HSC at 10 Cents each
Good luck :)
Yes I see. It is rated at .3 watt each resistor. I bet the 1 watt rating is for the whole pack of resistors and not one. The ones I ordered off ebay are .2 watt. I will see what happens. I bet they will be fine.
Thanks Guys....
Ron
-
Looks like we need RJ to update the SSR4 Mouser order definition
Mouser #: 140-XRL25V100-RC
Mfr. #: 140-XRL25V100-RC
Manufacturer: Xicon
Desc.: Aluminum Electrolytic Capacitors - Leaded 25V 100uF 20%
RoHS: RoHS Compliant
Info: View Additional Product Info
Lifecycle: End of Life: Scheduled for obsolescence and will be discontinued by the supplier.
Not Available
Possible Replacement
140-REA101M1EBK0611P
-
The capacitor was talked about in this thread if you still need a replacement part.
http://diylightanimation.com/index.php?topic=4543.0 (http://diylightanimation.com/index.php?topic=4543.0)
-
The capacitor was talked about in this thread if you still need a replacement part.
http://diylightanimation.com/index.php?topic=4543.0 (http://diylightanimation.com/index.php?topic=4543.0)
We still need RJ to update the Mouser BOM!