DiyLightAnimation

Fun => The Porch => Topic started by: PIC on November 18, 2014,

Title: Basement test setup
Post by: PIC on November 18, 2014,

First year trying RGB nodes.  Have all my eves covered and a 9' 8string mega tree.  Was able to test and store in basement.  Used j Channel on eves.  Easy to install and keeps most rain/snow off nodes.  Drilled many holes with this jig.  Thought I would share to give ideas to others.

Title: Re: Basement test setup
Post by: duane.mosley on November 18, 2014,

I like how you used the stud to mark your spacing. I marked a 2x4 and used it as a guide to mark all of my pipe(1600 node pixel tree, 3 nights of drilling holes) your method would have made things a lot faster. I will have to keep that in mind for my matrix.

Title: Re: Basement test setup
Post by: PIC on November 19, 2014,

This is jig I used for my tree.  1/2" pvc.  Routered a groove so pipe would stay centered.