DiyLightAnimation

Hardware => Lynx Express => Topic started by: keithr on November 07, 2011,

Title: Data light stays on.
Post by: keithr on November 07, 2011,

Have 2 LE's that have the data LED on. Test run works fine, tested with LSP and all channels seem to work fine.  Checked to make sure the led was installed correctly.

Title: Re: Data light stays on.
Post by: Dennis Cherry on November 07, 2011,

You are not allowed to view links. Register or Login

Have 2 LE's that have the data LED on. Test run works fine, tested with LSP and all channels seem to work fine.  Checked to make sure the led was installed correctly.

Swap the two 485 chips on each LE and see if that fixes it. 

Some of the 485 chips have this problem of keeping the Data light on and still work correctly.

Title: Re: Data light stays on.
Post by: keithr on November 07, 2011,

BINGO!! Dennis, thank you sir...

Title: Re: Data light stays on.
Post by: Dennis Cherry on November 07, 2011,

You are not allowed to view links. Register or Login

BINGO!! Dennis, thank you sir...

Anytime Keith.

Title: Re: Data light stays on.
Post by: keithr on November 08, 2011,

WOW! Mouser is pheonomenal, I ordered those chips and I just got them at my door. Thats some turn around time.

Again thank you Dennis....