Decided to finish my Ether Dongle and try it out. Flashed PIC and it seems to have flashed OK. Plug in power to board and nothing, no green light, no ether net lights. Here is what I have done so far:
1. Re- touched whole board
2. Check voltages 7.93 at power header, 3.29 volts off of 3.3 reg, 5.0 volts off 5 volt reg.
3. Double checked orientation of LED, caps, Oscillators and chips all correct.
4. Held board up to light and checked for solder bridges on SMD chips - could see none.
5. Tried connecting directly to PC and to router neither showed any activity.
Attached Pictures of Board
Just need a plan to diagnose what's wrong.