DiyLightAnimation

Fun => The Porch => Topic started by: kfxi on July 22, 2014,

Title: zeus part
Post by: kfxi on July 22, 2014,

I was installing the 4 pin connectors where the computer plugs into the zeus board and I broke a pin, "dumb dumb dumb". Can someone give me the part number where I can order a replacement from mouser.

Thanks
Ken

Title: Re: zeus part
Post by: maffeirw on July 22, 2014,

You are not allowed to view links. Register or Login

I was installing the 4 pin connectors where the computer plugs into the zeus board and I broke a pin, "dumb dumb dumb". Can someone give me the part number where I can order a replacement from mouser.

Thanks
Ken

If you referring to the 4 pin Molex connector which attaches to a computer power supply see the link
http://www.mouser.com/Search/ProductDetail.aspx?R=15-24-4449virtualkey53810000virtualkey538-15-24-4449
Also I believe that, when holding the PCB so you can read the Lynx Zeus 16 label, the far left pin is +12v, the center two pins are connected together for the ground and the right most pin is unused in the Zeus, so if you broke either the far right pin or one of the two center pins you should be able to do without it, if you can connect the plug without shorting any of the other pins.
Ron

Title: Re: zeus part
Post by: kfxi on July 23, 2014,

Thganks that is the part I needed

Ken