Solder looks pretty good and no bridges in the pins, but something definitely is wrong, I plugged the Aether to verify if I have power, and the LED (Red/Green) doesn’t turn on.
I measure the input of the 5V regulator (pin 1 and 2) and I get 11.8 Volts, I measure the output (pin 2 and 3) and it’s 0.
I don’t know... the PICKit doesn’t see the PIC when I connect to the ICSP and with Power the 5V regulator doesn’t produce any output. I may have fried the whole board may be because of temperature excess.
Which is weird is when I put power on the board the 6 LED blinks white once for about 20ms, after that nothing else happen.
The board doesn't have too many components.... I'll do one more check and start desoldering the regulator first then god help me with the PIC.
Cas.