DiyLightAnimation
Hardware => Lynx Express => Topic started by: inzeos on October 22, 2010,
-
Working on putting together my next list of parts to source from Mouser.
I ordered parts originally using the direct Mouser project link for LE v5.
However, I noticed that the BOM for LE v5 has a part listed on it that does not appear in the Mouser project and does not seem to have a spot on the board itself.
517-4828-3004-CP|1
517-4824-3004-CP|1
I believe that 517-4828-3004-CP qty 1 is the correct part needed for the LE v5 board and that 517-4824-3004-CP qty 1 has no place on the board and might be left over from a previous part list?
If 517-4824-3004-CP is still being used could someone please point out where? If I need to order these I would like to include them in my next bulk order to avoid extra shipping charges.
-
The 517-4824-3004-cp is the 24 pin socket needed for the LED driver the part number replaced a obsolete 571-1-390262-1 part number
of course I could be wrong
but maybe not
Rick R.
-
No Rick, you're right; I just went through this list for a recent LE build. It is the socket for the LED driver chip. However, the correct Mouser part number is 517-4824-6004-CP and is on the project list (looks like the BOM has a typo). The '6' indicates 0.600" row spacing vs. '3' for 0.300" (as needed by the other chips).
-
No Rick, you're right; I just went through this list for a recent LE build. It is the socket for the LED driver chip. However, the correct Mouser part number is 517-4824-6004-CP and is on the project list (looks like the BOM has a typo). The '6' indicates 0.600" row spacing vs. '3' for 0.300" (as needed by the other chips).
Many thanks StanB
I fixed the typo
Cheers
Rick R.