DiyLightAnimation
Software => Light Show Pro => Topic started by: travailen on August 22, 2012,
-
In my enthusiasm to get started, I placed my megatree in the display viewer in the wrong location and used wrong channel assignments. So, I need to remove it and try again. Unfortunately, I cannot figure out how to remove it from the visualizer. I can see how to remove it one channel at a time but, with 3K channels, that could take a long time. Any help in getting my mega tree removed from the display viewer in a more efficient manner would be appreciated.
Thanks,
Rick S
-
Right click on the channels or controllers and click reset channel effects.
-
Right click on channel or controller and select "Clear all channel images".
-
What version are you using? If I remember correctly, 2.5 will let you move and delete a tree.
You can use the clear version as suggested. One tip is to create a controller just for your mega tree. Although I am using a single E1.31 controller, I create multiple controllers for each of my major elements. This makes management easier.
-
What version are you using? If I remember correctly, 2.5 will let you move and delete a tree.
You can use the clear version as suggested. One tip is to create a controller just for your mega tree. Although I am using a single E1.31 controller, I create multiple controllers for each of my major elements. This makes management easier.
So, even though I am using only one etherdongle, I could set up several E1.31 controllers with different addresses. For example, one for the tree and one for the arches, etc. I will try that. I can see how that would be very usefull.
Thanks.
Rick S
-
Yes, you can have multiple controllers each set to E1.31 with different start numbers. Works great and makes tracking elements easier.