DiyLightAnimation

Hardware => Lynx Wireless DMX => Topic started by: Sloanhaus on September 27, 2009,

Title: Is there any where else to get parts at?
Post by: Sloanhaus on September 27, 2009,

Mouser has 3 parts on back. They dont have the sockets and they dont have the antenna adaptor. Is there any where else to purchase these items besides mouser?

Thanks

BRad

Title: Re: Is there any where else to get parts at?
Post by: wbuehler on September 27, 2009,

You are not allowed to view links. Register or Login

Mouser has 3 parts on back. They dont have the sockets and they dont have the antenna adaptor. Is there any where else to purchase these items besides mouser?

Thanks

BRad

Try

http://www.digikey.com

I had to get the atenna adapters from them for the Co-Op.

http://www.jameco.com

Also is a good choice for sockets ans such.

Also Mouser has 3M sockets that others have used also you can get sockets with gold plating they cost a bit more but Mouser should have them.

Bill

Title: Re: Is there any where else to get parts at?
Post by: Sloanhaus on September 27, 2009,

You don't remember what the part number was do you?

Title: Re: Is there any where else to get parts at?
Post by: Kwajtony on September 27, 2009,

I found the dip sockets at jameco by searching for the MFG's part no.  Don't know about the antenna connector since I have not tried wireless yet       >:(  Maybe next year after I get my first setup working.

Title: Re: Is there any where else to get parts at?
Post by: wbuehler on September 27, 2009,

It's the same process.  Take the Manufacture part # that Mouser lists and do a DigiKey search.

Bill

Title: Re: Is there any where else to get parts at?
Post by: Ron on September 27, 2009,

You could also try octopart.com (http://www.octopart.com).  It will search several resellers for electronics parts.

Ron

Title: Re: Is there any where else to get parts at?
Post by: joshuashu on September 27, 2009,

brad

if you happen to find the parts let me know, as i am looking too.

Title: Re: Is there any where else to get parts at?
Post by: b_legg on September 27, 2009,

Hey Brad, here is the Mouser number for the 3M 8-pin sockets i sub'd for the backordered ones.....

517-4808-3004-CP

Brian

Title: Re: Is there any where else to get parts at?
Post by: mschell on September 27, 2009,

That's definitely the 3M part number that I used on my recent order, and works very well!

Title: Re: Is there any where else to get parts at?
Post by: jnealand on September 28, 2009,

I also used that 3M socket. no problems.

Title: Re: Is there any where else to get parts at?
Post by: Sloanhaus on October 04, 2009,

Thanks everyone