DiyLightAnimation

Fun => The Porch => Topic started by: UncleBuck on April 08, 2012,

Title: Optocoupler 6N137 Chip for DMX Dongle
Post by: UncleBuck on April 08, 2012,

When I first started with DLA I jumped right in and built the DMX dongle. I had never soldered before so I purchased two pcd's and parts to match. Good thing I did two because I screwed up the first one. In my hast to finish I soldered the chip directly to the board. Instead of leaving it alone I decided to remove it from the board and install the socket base. Bad idea, in the process I destroyed the chip.

To make along story short does anyone have a optocoupler 6N137 chip for the DMX dongle they want to get off their shelf?

Title: Re: Optocoupler 6N137 Chip for DMX Dongle
Post by: nvizzini on April 10, 2012,

Hi
You can order the part from Mouser
Mouser Part #:  630-6N137-000E
http://www.mouser.com/Search/ProductDetail.aspx?R=6N137-000Evirtualkey63050000virtualkey630-6N137-000E
it is the same that is part of the bill of materials listed
in the wiki

Nicholas