DiyLightAnimation

Hardware => Lynx EtherDongle => Lynx Conductor => Topic started by: sittinguphigh on December 13, 2012,

Title: Is there a conductor test of any kind?
Post by: sittinguphigh on December 13, 2012,

I have my ED, SSC and smart strings tested. All working good.
Is there any kind of test for the conductor?

Title: Re: Is there a conductor test of any kind?
Post by: rrowan on December 13, 2012,

Not really since its just a add-on board for the etherdongle. The Conductor Control Panel does check for communication with the conductor for the CF and the real time clock.

Rick R.

Title: Re: Is there a conductor test of any kind?
Post by: sittinguphigh on December 13, 2012,

So just make up a quick test sequence with music down load into the card and try it out.

As what I been told the set up for the conductor is.

First if your using nutcracker.

then vixen to set the music

Then change the language threw xlights for the conductor


Then if you wish use android the control it or just turn the power off and on.

In my case I would like to use android.

When do you load the conductor firmware to the ED/CONDUCTOR?