DiyLightAnimation
Hardware => Lynx Express => Topic started by: BrianO on November 20, 2009,
-
Anyone be able to help me out with some alternate parts, or maybe you have some laying around? I need the following, in the listed qtys.:
Mouser part #'s
571-5556416-1 Telecom & Ethernet Connectors 8 PCB TOP ENTRY (need 12)
604-SA04-11GWA LED Displays .4 GREEN (need 12)
688-SPPH430200 Pushbutton Switches VERT MOMENTRY 2 POLE (need 8)
294-15K-RC Carbon Film Resistors 15Kohms 5%
This is my first year attempting to build something like this, although I have messed with MOBOs and stuff like that. I'm no elec engineer, thats for sure. So please forgive my stupidity and lack of knowledge on how to replace these parts. I found the missing dongle parts I needed, by reading the boards, but have not seen much about these parts. tried a few of the other vendors online, but they didnt have the parts either.
Thanks in advance for any assistance rendered!!
I must have blinky blinky, flashy flashy.....I'm hooked!!! might have to start going to support group meetings....lol
-
Did you place an order for these parts already on Mouser? I purchase the backordered parts from them all the time, and they usually get them out to me within 4-5 days (once they get them back in stock). I believe I'm actually backordered for those parts as well. I believe you'll have plenty of work to do before they get those parts to you. I would just go ahead and get in queue on those backordered parts and hope for the best.
I must have blinky blinky, flashy flashy.....I'm hooked!!! might have to start going to support group meetings....lol
Welcome to your support group! That's why we're here! :p
-
From what I read, Looks like the stuff is several weeks out from the manufacturer.
-
From what I've seen on selected parts, some manufacturers aren't living up to their delivery schedule. I've had a few items on an order that I placed back in September still not come available, and Mouser keeps pushing back their delivery date.
So just check the planned delivery dates before you place the order.
Also, Digi-Key and several other places sometimes have items in stock that Mouser doesn't, although some have minimum quantity limits.
-
I was able to fine one part at jameco, but the other three are still outstanding....
-
What's the difference between these? Might be a replaceable part.
Mouser Part #: 571-5569284-1 as a replacement for 571-5556416-1 Telecom & Ethernet Connectors 8 PCB TOP ENTRY (need 12)
For 688-SPPH430200 Pushbutton Switches VERT MOMENTRY 2 POLE this place says they have it in stock:
http://instock.onlinecomponents.com/ALPS-ELECTRIC/SPPH430200.html (http://instock.onlinecomponents.com/ALPS-ELECTRIC/SPPH430200.html) However they require a $35 min purchase :-\
(removed non-valid part number to eliminate confusion)
-
What's the difference between these? Might be a replaceable part.
Mouser Part #: 571-5569284-1 as a replacement for 571-5556416-1 Telecom & Ethernet Connectors 8 PCB TOP ENTRY (need 12)
Mouser Part #: 688-SPPH430100 as a replacement for 688-SPPH430200 Pushbutton Switches VERT MOMENTRY 2 POLE (it's latching but could work).
That is not a push button but a latching button. Will not work.
RJ
-
I was able to fine one part at jameco, but the other three are still outstanding....
What part did you find at Jameco?
-
I was able to fine one part at jameco, but the other three are still outstanding....
What part did you find at Jameco?
the rj45 jacks
571-5556416-1 Telecom & Ethernet Connectors 8 PCB TOP ENTRY (need 12)
thats all I have been able to find so far. I didnt order them yet, so I didnt read and see if there was a minimum order.
-
What's the difference between these? Might be a replaceable part.
Mouser Part #: 571-5569284-1 as a replacement for 571-5556416-1 Telecom & Ethernet Connectors 8 PCB TOP ENTRY (need 12)
Mouser Part #: 688-SPPH430100 as a replacement for 688-SPPH430200 Pushbutton Switches VERT MOMENTRY 2 POLE (it's latching but could work).
That is not a push button but a latching button. Will not work.
RJ
Will this part work for the pushbutton switch? http://www.mouser.com/ProductDetail/ALPS/SPPH410200/?qs=nco%2f1JLdfbfECsLfY24qsw%3d%3d
-
Will this LED display work? The wavelength is 3nm different. I have no idea, but this one they have in stock.
http://www.mouser.com/ProductDetail/Kingbright/SA04-12GWA/?qs=sGAEpiMZZMvkC18yXH9iIgvC7dgeX7B5bGCk0wyOLrc%3d
-
Will this LED display work? The wavelength is 3nm different. I have no idea, but this one they have in stock.
http://www.mouser.com/ProductDetail/Kingbright/SA04-12GWA/?qs=sGAEpiMZZMvkC18yXH9iIgvC7dgeX7B5bGCk0wyOLrc%3d
I ordered the correct part directly from Kingbright. Shipping was more than the total parts cost....ouch!!!
-
What did you decide on the push button switch? We could go in together on some of these things and save some shipping costs. I'm backordered on the same items.
-
Havent found anything for the switch or resistor so far. Did find the LED displays, ordered directly from Kingbright. also found the RJ45 jacks from Jameco. I am going to order the jacks today from Jameco. do you want in? send me PM with amount you need.
-
I think the only part I am missing now, are the switches (688-spph430200) I need 8, if anyone has some to lend. I think sirwesley needs some too. Resistor I will look for at the shack. got the displays and the rj45 jacks ordered.
-
I had to get the switches from "Onlinecomponets.com", I just ordered a new soldering gun to fill the minimum order. It was the only place that had them in stock and did not want a 1500 part min order.
-
I had to get the switches from "Onlinecomponets.com", I just ordered a new soldering gun to fill the minimum order. It was the only place that had them in stock and did not want a 1500 part min order.
I wish I would have known, BrianO and I went in together to buy these switches from "Onlinecomponents.com". I filled out my order with other parts to build an Express in the future.
-
just curious, does any one have a BOM from them, and what was the cost?
-
Here's a good filler if you plan on building the USB Dongle. It will help get your order up to the $35 dollar minimum purchase order from "Onlinecomponents.com".
http://www.onlinecomponents.com/buy/DLP-DESIGN-INC/DLP-USB245M-G/
-
I check the address and kingbrite is in the LA area. I think i drive past it regurlarly. I am going to drive by monday and see if i can buy the SA04-11GWA and save my self shipping and the delay.
their address:
225 Brea Canyon Road
City of Industry, CA 91789, USA
-
I check the address and kingbrite is in the LA area. I think i drive past it regurlarly. I am going to drive by monday and see if i can buy the SA04-11GWA and save my self shipping and the delay.
their address:
225 Brea Canyon Road
City of Industry, CA 91789, USA
That's a good idea, cuz they really nailed me on the shipping. They charged me a special handling charge of five bucks, and then a shipping and handling charge of 8.99. Shipping was more than the item cost.
-
i need to order the rest of my components from onlinecomponents but the web site is kind of crude. I found all of the parts i am missing but i wanted to order a bunch of standoffs with 3mm screws to reach the $35 minimum order. There site it doesnt find any of the part numbers from mouser, you cant do a key word search and no online catalog. I will have to call them monday morning. It looks like they may have offices in LA as well, at least they have a po box here so i will ask them if i can pick up the parts.
-
i need to order the rest of my components from onlinecomponents but the web site is kind of crude. I found all of the parts i am missing but i wanted to order a bunch of standoffs with 3mm screws to reach the $35 minimum order. There site it doesnt find any of the part numbers from mouser, you cant do a key word search and no online catalog. I will have to call them monday morning. It looks like they may have offices in LA as well, at least they have a po box here so i will ask them if i can pick up the parts.
Be careful with this company. I got charged a total of $38 for shipping (4x $9.50) They charged me shipping for each item i ordered, because they shipped them from separate locations. I'm calling them Monday to demand some of my money back. They even shipped two of the items from the same place and charged me shipping for both.
So be careful with this store.
On the Mouser part numbers issue, you have to search for the manufacture part #. They do not have many of the parts that Mouser has, at least that I could tell. Good luck with your phone call on Monday.