DiyLightAnimation

Hardware => Lynx Express => Topic started by: deplanche on July 02, 2009,

Title: Curiousity
Post by: deplanche on July 02, 2009,

On the LE v 3.0, for the 180 resistors, every other resistor location has a filled in circle after the number on the PCB.  What does this represent? 

Not an important question, just curious and trying to learn.

Title: Re: Curiousity
Post by: ThaiWay on July 02, 2009,

The 180 ohm resistors for the LED have a dot marked on the PCB. 

The unmarked 180's could be changed to a different value if you were powering the LE with 240VAC.  See http://diylightanimation.com/wiki/index.php?title=Manual_Express_v3#Appendix_B_240VAC_mod

John