DiyLightAnimation
Hardware => Lynx EtherDongle => Topic started by: RJ on September 25, 2011,
-
I need to see if the demand is there for the EtherDongle to be coop'ed
Since the pcbs have to have the two surface mounted chips on the pcbs for us it is a little more demanding a coop than most so quanity is important.
This is not a coop and you are not signing up for a coop on this post. Please only post if you are going to get into a coop if it gets offered. Please only post the number you would get not how many you wish you could get, or why you will not get any or why you are only getting one which most people should only get one.
This is important as it is so I can check part avaliablity and costing to get the chips mounted, ect.
Please post only if you plan to order on the coop and only how many you need. If you have questions ask on a seperate thread.
Thanks
RJ
-
One for me
Rick R.
-
I would be in for one (more).
-Mike
-
I would be in for one.
-Jeff
-
1 for me (with or without the SMT mounted...)
/mike
-
I would be in for one.
Brian
-
one for me (with or with out chips mounted)
Jess
-
I'd be in for one. Thanks, RJ et al.
tlh/Terry
Sent from my iPhone using Tapatalk
-
I would be in for one (1).
Russell
-
One (1)
MikeC
-
I would order one.
-
I would order 1
-
I would be in for one, and if offered a second PCB.
Erik
-
one (1) Please.
Donny
-
1 for me (with or without the SMT mounted...)
/mike
They will all come with them mounted sorry.
At least the first go around they will be just kits no pcbs only.
RJ
RJ
-
One Please -
Pete
-
1 for sure 2 depending on price.
Harrison
-
I would like to go for 1. Don't need it but I want to have the current equipment for the add on's that will be coming out some day. <;d
Thank You!
Ron
-
Definte 2 - one primary and a backup
-
one for sure...90% probably 2
-
One for me.
Mike
Sent from my SPH-D700 using Tapatalk
-
I don't need one this year, but I would order one for next year.
John
-
1 to 2
-
Qty = 2
Always need a back up.
-
I will be in for 1.
Thanks,
Brian
-
Planning on two
-
Two for me - one as a backup
-Paul
---
I am here: http://maps.google.com/maps?ll=28.522461,-81.594052
Sent via iPad2 using Tapatalk
-
I would be in for two when the COOP starts
-
One for me >.d9
-
Put me down for one. <;d
-
2, please.
-
2
-
Hi RJ.
2 please.
Leon
-
Greetings,,,
1 here.
Keith
-
I would be in for 1.
-
Thanks JR,
I would be in for (1)
TMB
-
One (1) please.
-
2 please
Thanks
-
2 for me please
Thanks
-
I would take 1 in the first coop.
-
One for me. Unless I spend all my money on smart strings, but then I would need the ether dongle for sure. LOL
Maybe we could all send in a deposit to hold our position and to help you fund the cost of getting the pcbs built. I little more paperwork, but less money out of your pocket.
-
1 for me :-)
-
What is the turn around time and highest price they will cost I want 2 but I am very close to my max on funds for the year.
-
I would be just guessing on the turn around. Depends on too many variables like how fast the coop runs and how fast people pay and how long the pcbs take and how long the assembly house takes putting the chips on. And how many we have on the coop and is there going to be any backorders by the time we can order parts and how long the lead time on any part that does backorder. <wd..
Yeah, there is a lot to it.
The price is of course based heavily on quanitity. But at the lowest quanitity I can see of 25 I am coming in about $90. If we hit 100 then it will drop since we break over a discount level on everything from the pcb's to the assembly house price and the parts.
Mine cost about $1000
RJ
-
I would get one (1)
thanks, Kevin
-
I would be in for 2
-
In for 1...thanks RJ
-
I would be in for one (1)
-
I would be in for 2
-
I would be in for one.
Steve
-
I'm good for 1
-
Put me down for 1 if not 2 depending on final price.
Tyhanks RJ
Wally
-
1 or 2 depending on the final price.
-
I believe I'll take 1.
Ron
-
I would be in for one. Paul
-
I woild be in for 1....
-
1 for me
-
1 for me please!
-
Make mine a single.
Thx.
\dmc
-
Make mine a single.
Thx.
\dmc
Seriously I thought the EtherDongle was married since next year it will have a daughter
My apologies to RJ
Rick (not right) R.
-
Make mine a single.
Thx.
\dmc
Seriously I thought the EtherDongle was married since next year it will have a daughter
My apologies to RJ
Rick (not right) R.
Your weird ! (in a nice funny way)
Ron
-
I would be interested in one...
-
I'd be in for 1 or 2. Depends on the cost and if I've shot the Xmas light budget yet!
-
I will order 1.
Leo
-
I'm thinking at least 1 for lights. Depending on the cost more to use as breakout boards/mucking about. :)
-
I would like 1
-
I will be getting 2, I always have a backup
Glen
-
One for me.
-
R.J.
I would be looking for 1 Etherdongle and a conductor or 2 when they become available.
Mike.
-
I would take one as well.
-
One for me please........
Odlid Dave
-
I would take one as well.
-
I'd be up for 1
-
1 for me
-
1 for me
-
I would order 2.
Thanks,
Rick S
-
1 for me.
-Keith
-
Sign me up for one.
-
1
-
I would order one.
-
1 for me as well Please.
-
I am hoping for 1 this season.
Thanks,
Craig
-
I would order one but I really don't need it for this years display.
-
I would order one
Ken
-
I would order one.
-
1 for me
nicholas
-
2 or 3 depending upon estimated price.
-
COOP STARTED !
http://diylightanimation.com/index.php?topic=5988.msg93899#new