DiyLightAnimation

Hardware => Lynx Express => Topic started by: bob81354 on December 02, 2012,

Title: need help #6 led on
Post by: bob81354 on December 02, 2012,

HI to all
I just finished my first LE and all i  get is the 3.5 v & 5v  and the #6 leds on
I think i programed my chip right  but no go and all my sodering looks good
thanks Bob

Title: Re: need help #6 led on
Post by: winwin on December 02, 2012,

Do you mean you get nothing when running from your computer or that you get nothing when running the built-in test mode on the board?
It could be the chip is not programmed right. Tell us more please.
Don't be discouraged, there are a bunch of great folks willing to help here and I am confident someone will get your problem fixed.

Title: Re: need help #6 led on
Post by: rrowan on December 02, 2012,

I would reflash the pic. What you are seeing is a normal reaction to the pic not properly programmed.

Rick R.

Title: Re: need help #6 led on
Post by: pokey on December 05, 2012,

I had the exact same issue last night (among other Rookie mistakes!).  Reflashing fixed up the ghost #6 LED...replacing a couple of burned out chips solved the other!  Doh!

Title: Re: need help #6 led on
Post by: Segull on December 13, 2012,

Just had this exact same scenario, I reflashed pic LE workin like a charm.   ;D

Title: Re: need help #6 led on
Post by: bassmants on December 13, 2012,

Almost definately needs to be reflashed.  I had this happen on my first few and before I read it here earlier this year I was pulling my hair out thinking I did something wrong.  Good luck, you'll get it!

Title: Re: need help #6 led on
Post by: sjb on December 14, 2012,

You are not allowed to view links. Register or Login

Almost definately needs to be reflashed.  I had this happen on my first few and before I read it here earlier this year I was pulling my hair out thinking I did something wrong.  Good luck, you'll get it!

+1