Software > Vixen
Changing channel order doesn't work properly?
bking85295:
I have tried changing my channel order when I have switched certain light strands to one of my different LE boxes, for example.
When I change the channel order in 'Manage Profiles', it seems to save the change properly.
But when I go play a Sequence that is tied to that profile, the channel order hasn't changed (i.e. still in it's original order it was set at).
Any suggestions on what I'm doing wrong?
scharbon:
I think you are misunderstanding the Channel order option. That just changes how the channels are presented in the Vixen UI. It does not remap channels in Vixen to different channels on controllers. That is still going to be something you have to manage at the hardware level. Vixen 3 added that functionality (as did Vixen+ I think).
Let me know if I misunderstood your problem.
Steve
bking85295:
Let me give an example to see if I understand the limitations correctly.
If I have a palm tree currently set on Channel 3 on my 1st Lynx Express (overall system channel 3), and I physically change my extension cord routing and hardware to have it run to Channel 4 on my 2nd Lynx Express (overall system channel 20), is there no quick way to change the Vixen software (on Vixen 2.0) to move my channel order to reflect this hardware change? i.e. move the palm tree from channel 3 to channel 20?
scharbon:
You are not allowed to view links.
Register or LoginLet me give an example to see if I understand the limitations correctly.
If I have a palm tree currently set on Channel 3 on my 1st Lynx Express (overall system channel 3), and I physically change my extension cord routing and hardware to have it run to Channel 4 on my 2nd Lynx Express (overall system channel 20), is there no quick way to change the Vixen software (on Vixen 2.0) to move my channel order to reflect this hardware change? i.e. move the palm tree from channel 3 to channel 20?
--- End quote ---
Given your more detailed explanation of what it is you want to do, then:
1) I answered the correct question
2) I believe I answered the question correctly
Unless someone corrects me because I am wrong (which is always likely), the only thing you can do is (assuming you are swapping channels 3 and 20):
1) right click on channel 3
2) Copy the channel
3) paste it to an empty channel (one you are not using - say channel 100)
4) right click on Channel 20
5) Copy the channel
6) paste it into channel 3
7) Copy channel 100
8) Paste it into channel 20
9) Clear channel 100
I am not aware of remapping channels in Vixen to different output channels in the yard. In fact, in one of the other Christmas light forums, a similar discussion just happened. Someone thought it was possible (feature added) but they cannot figure it out. I think he was thinking about Vixen+ or Vixen 3.
5)
jnealand:
I would also do it the way scharbon stated.
Navigation
[0] Message Index
[#] Next page
Go to full version