Still working on the display.
Worked on the window frames and resistor mounts for the MR16. I wanted the resistors to be mounted so they would have support. I cut small rectangles from a piece of perf board from Radio Shack and used it to secure the resistor and the wires to. After that a little bit of heat shrink to cover it. On the Window frames I planned on having 3 strings of C9 lights around each window so instead of mounting them around the windows I mounted them to a frame to make the install easier.
I like the big bulbs. We used them all the time when I was a kid. Each window will have 72 C9 bulbs around it. I removed one bulb and the female plug end from each string. I wanted an even number of bulbs and I was not going to plug any thing into the strings.
Still have work to do for the MR16's and window frames but it's getting there.
You are not allowed to view links.
Register or
LoginYou are not allowed to view links.
Register or
LoginYou are not allowed to view links.
Register or
LoginYou are not allowed to view links.
Register or
LoginYou are not allowed to view links.
Register or
LoginYou are not allowed to view links.
Register or
LoginYou are not allowed to view links.
Register or
LoginYou are not allowed to view links.
Register or
LoginBill