DiyLightAnimation
Fun => The Porch => Topic started by: salongaopm on October 29, 2014,
-
Has anyone tried this 27 channel controller? I am wondering if this is okay to use for dumb rgb 5050 fles strip.
http://www.aliexpress.com/item/27CH-Easy-DMX512-dimmer-Controller-27-channel-DMX-decoder-have-xlr-and-RJ-45-jacks-LED/1911178199.html
-
Yep I've got a couple and they work great.
-
How are the RJ45 jacks used? if DMX, is the pinout described? assuming pin1=orange/white=DMX+ and pin2=orange=DMX-
-
can I just connect it to an le via rj45, set the start channel and done? also, can I use a pc power supply to power it? how?
-
I didn't have the rj45 on mine but I soldered the Orange/orange white on two pins on the board. I'm guessing it probably uses those but never hurts to ask