DiyLightAnimation
Hardware => Lynx Zeus => Topic started by: txag2008 on January 16, 2014,
-
Does anyone have the physical dimensions (length/width) for the Zeus? It'd also be nice to know the hole spacings in the pcb for mounting purposes. I couldn't find this in a thread or anywhere in wiki.
(http://www.diylightanimation.com/wiki/images/thumb/0/0f/Z16-15.jpg/800px-Z16-15.jpg)
(http://www.diylightanimation.com/wiki/images/thumb/e/eb/Zeus8-Fin.jpg/800px-Zeus8-Fin.jpg)
-
Zeus 16 =
10" X 5.5" 9 13/16" X 5 5/16"
Zeus 8 = 6.75" X 5.25" 6 9/16" X 5 1/8"
I'll get hole spacing when I get home.
Denny
-
I got a hair smaller when I measured the outer dimensions of my boards but I would go with Denny's just to be sure they will fit where you want to put them.
I measured the mounting holes as follows:
Zeus 16 = 8" X 4"
Zeus 8 = 5 7/16" X 3 13/16"
-
Maffeirw,
You're right about the dimensions being smaller. I used an old tape the first time and I just measured it again with a new tape measure. These should be more accurate:
Zeus 16 = 9 13/16" X 5 5/16"
Zeus 8 = 6 9/16" X 5 1/8"
Thanks for getting the hole measurements.
Denny
-
Thanks for look at that guys. Will help in figuring out my mounting options without actually having a Zeus yet.
I made a quick drawing off those dimensions that I'll share if anyone is interested.
(http://i39.tinypic.com/zksrb9.jpg)