DiyLightAnimation

Hardware => Lynx EtherDongle => Lynx Conductor => Topic started by: sabie on February 12, 2013,

Title: dmx for conductor do we have a guess when it's firmware will be ready?
Post by: sabie on February 12, 2013,

dmx for conductor do we have a guess when it's firmware will be ready?

i would like to start playing with it

possible alpha test if necessary to help it along

Title: Re: dmx for conductor do we have a guess when it's firmware will be ready?
Post by: golights on February 15, 2013,

I would also like to use my conductor with the dmx firmware. 

Title: Re: dmx for conductor do we have a guess when it's firmware will be ready?
Post by: rrowan on February 15, 2013,

This is JUST my Guess but I think RJ is working on fixing the pixelnet firmware first then the slave firmware should follow then the DMX firmware should drop in place with most of the issues worked out.

I have not asked or talked to RJ about the DMX firmware so take this with a grain of salt?

Rick R.

Title: Re: dmx for conductor do we have a guess when it's firmware will be ready?
Post by: RJ on February 15, 2013,

Rick is correct.

RJ