This is the correct picture for DMX to Renard:
You are not allowed to view links.
Register or
LoginIf the Renard Pics are flashed to DMX then you don't need to output Renard modified from vixen.
The LE will output all 512 channels on its DMX output so the Renard should get the signal it needs if they are flashed to DMX and the data lines are run correctly.
I made little short adapter cables using the diagram I posted above using a keystone jack, 2" cat5 cable and a cat5 plug. That way I just used an adapter and could run normal cat5 for everything else
Renard SS24 will use up 24 channels and output what is left over.
So I always ran my Lynx Expresses first and then the Renard SS24 after.
The first Pic for Renard DMX should be set for a set for a start channel or if just the default it will be channel 1.
The second and third pics should always be set for channel 1.
If the person just flashed DMX firmware they downloaded it is probably the default of channel 1.