DiyLightAnimation
Hardware => Lynx Smart String => Topic started by: teberle on November 26, 2015,
-
I have an ether dongle flashed with pixel net firmware, connected to the active hub with a LE plugged into the DMX out.
The LE shows a DMX link light, but when I send data from vixen, the board does not do anything.
The etherdongle is receiving data, the LE passes tests and every thing is set universe 1
Not sure what the issue may be.
-
The PIC on the active hub MAY need to be re-flashed.
-
Do you know if the ETD is working? Did you flash the PIC on the HUB?
-
I am going to reflash the active hub and see if that gets it.
Sent from my SM-G900R4 using Tapatalk
-
Did the reflash help?
I just ran into this same issue and am hoping reflash will be the fix.
-
I have tested the edongle and the active hub is currently running my flex tree